Siemens 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 HMI Case
Siemens 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 HMI Case
6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 Siemens SIMATIC S7-300 Module Housing
S7-300 6AG1337PF014AB0 6AG13317PF114AB0 SM 331 analog input modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
Class 3M3 (mechanical requirements)
Class 3K3 (climatic requirements)
Mechanical environmental conditions
The table below shows the mechanical environmental conditions in the form of sinusoidal oscillations.
Reducing vibrations
If your S7-300 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 Plastic Shell modules are exposed to severe shock or vibration, take appropriate measures to reduce acceleration or the amplitude.
We recommend the installation of the 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 Enclosure S7-300 on damping materials (for example, rubberbonded-to-metal mounting.)
VICPAS supply 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 Siemens SIMATIC SM 331 analog input modules Case Parts.
| Part Number : | 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 |
| Atmospheric pressure: | 1080 to 660 hPa |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens Simatic S7-300 |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Safety isolation: | SELV circuit |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Efficiency: | 84 % |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6AG1331-1KF02-7AB0 | Siemens SIPLUS S7-300 Plastic Case SM 331 Replacement | Available Now |
| 6AG1331-7KB02-2AB0 | SIMATIC S7 300 SM 331 Plastic Shell Repair Part | In Stock |
| 6AG1331-7KF02-2AB0 | Siemens S7-300 SM 331 Housing Enclosure Repair | Available Now |
| 6AG1331-7NF00-2AB0 | Siemens S7-300 SM 331 Plastic Shell Replacement | In Stock |
| 6AG1331-7NF10-2AB0 | Siemens S7-300 SM 331 Plastic Case Replacement | In Stock |
| 6AG1331-7PF01-4AB0 | SIMATIC S7 300 SM331 HMI Enclosure Replacement | In Stock |
| 6AG1331-7PF11-4AB0 | SIMATIC S7 300 Plastic Case SM 331 Replacement | Available Now |
| 6AG1332-5HB01-2AB0 | Siemens S7-300 SM 332 Housing Repair Replacement | Available Now |
| 6AG1332-5HD01-7AB0 | Siemens S7-300 Plastic Shell SM 332 Repair | In Stock |
| 6AG1332-5HF00-2AB0 | SIMATIC S7 300 HMI Case SM 332 Replacement | Available Now |
| 6AG1332-7ND02-4AB0 | Siemens S7-300 SM 332 Housing Replacement | In Stock |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Putting a New 6AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0 Plastic Case Cover Body Module into Service
Answer: Proceed as follows to put the new module into service:
1. Open the front panel.
2. Reinstall the front connector.
3. Close the front panel.
4. Switch the load voltage back on.
5. Set the CPU to RUN mode again.
Question: When should I use expansion devices?
Answer: You can use EDs if the number of CU slots is insufficient for your application.
When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.
Common misspellings:
6AG131-7PF01-4AB0 6AG1331-7PF11-4AB0AG1331-7PF01-4AB0 6AG1331-7PF11-4AB0
6AG1313-7PF01-4AB0 6AG1331-7PF11-4AB0
6AG1331-7PFo1-4AB0 6AG1331-7PF11-4AB0
6AG1331-7PF01-4AB0 6AG13131-7PF11-4AB0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
