6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell
6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell
SIEMENS SIMATIC SM 331 analog input modules 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 HMI Case Replacement
Particularly in systems where sensors detect and/or process relatively low voltages and/or currents, it may be advisable to perform recalibration when the 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell module is in the system including all connected cables. This approach compensates any influence by cables and/or temperature.
If you carry out a calibration procedure, new calibration values are detected and saved retentively on the 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Housing module. This means that the calibration values determined for the module at the factory prior to delivery are not lost when users perform their own calibration work.
You can revert to these original calibration values at any time.
SIMATIC Outdoor 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Plastic Shell modules are modules that can be used under extended environmental conditions. Extended environmental conditions mean:
operation possible at temperatures from –25°C to +60°C
occasional, brief condensation permitted
increased mechanical stress permissible
The functional scope and technical specifications for the SIMATIC Outdoor 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 HMI Case modules correspond to those of the ”standard” modules. The mechanical and climatic environmental conditions as well as their test method have changed. The SIMATIC Outdoor 6AG13317NF002AB0 6AG13317NF102AB0 Plastic Case Cover modules have their own order numbers
Specifications:
The table below describes the parameters of the Siemens SIMATIC SM 331 analog input modules 6AG1 331-7NF00-2AB0 6AG1 331-7NF10-2AB0 Plastic Cover Parts.
| Atmospheric pressure: | 1080 to 660 hPa |
| Efficiency: | 84 % |
| Power consumption: | 57 W |
| Product Line: | Siemens Simatic S7-300 |
| Temperature: | –40 °C to +70°C |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Part Number : | 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 |
| Power loss: | Typ. 9 W |
| Safety isolation: | SELV circuit |
| Warranty: | 365 days Warranty |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6AG1331-1KF02-7AB0 | Siemens SIPLUS S7-300 Plastic Case SM 331 Replacement | Available Now |
| 6AG1331-7KB02-2AB0 | SIMATIC S7 300 SM 331 Plastic Shell Repair Part | In Stock |
| 6AG1331-7KF02-2AB0 | Siemens S7-300 SM 331 Housing Enclosure Repair | Available Now |
| 6AG1331-7NF00-2AB0 | Siemens S7-300 SM 331 Plastic Shell Replacement | In Stock |
| 6AG1331-7NF10-2AB0 | Siemens S7-300 SM 331 Plastic Case Replacement | In Stock |
| 6AG1331-7PF01-4AB0 | SIMATIC S7 300 SM331 HMI Enclosure Replacement | In Stock |
| 6AG1331-7PF11-4AB0 | SIMATIC S7 300 Plastic Case SM 331 Replacement | Available Now |
| 6AG1332-5HB01-2AB0 | Siemens S7-300 SM 332 Housing Repair Replacement | Available Now |
| 6AG1332-5HD01-7AB0 | Siemens S7-300 Plastic Shell SM 332 Repair | In Stock |
| 6AG1332-5HF00-2AB0 | SIMATIC S7 300 HMI Case SM 332 Replacement | Available Now |
| 6AG1332-7ND02-4AB0 | Siemens S7-300 SM 332 Housing Replacement | In Stock |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: How often do I have to replace battery?
Answer:
Backup battery: We recommend an annual replacement
Rechargeable battery: Never needs to be replaced.
Question: How to install a new 6AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0 Cover Body module?
Answer:
Install the new module as follows:
1. Insert the new module of the same type and swing it down into place.
2. Screw-tighten the module.
3. Slip the labeling strip of the removed module into its guide on the new module.
Common misspellings:
6AG1331-7NF00-2AB0 6AG133-7NF10-2AB0AG1331-7NF00-2AB0 6AG1331-7NF10-2AB0
6AG1331-N7F00-2AB0 6AG1331-7NF10-2AB0
6AG1331-7NFOO-2AB0 6AG1331-7NF10-2AB0
6AG1331-7NF00-2AAB0 6AG1331-7NF10-2AB0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
