Siemens SIMATIC S7 300 6AG1331-1KF02-7AB0 HMI Case
Siemens SIMATIC S7 300 6AG1331-1KF02-7AB0 HMI Case
6AG1331-1KF02-7AB0 Siemens SIMATIC S7-300 Module Housing Repair Replacement
S7-300 6AG13311KF027AB0 SM 331 analog input modules HMI Case systems are intended for stationary use in locations protected against the weather. The operating conditions surpass the requirements of DIN IEC 60721-3-3.
Class 3M3 (mechanical requirements)
Class 3K3 (climatic requirements)
SIPLUS S7-300 SM 331 8AI based on 6ES7331-1KF02-0AB0 Plastic Shell with conformal coating,
-25…+70 °C,
isolated 8 AI,
resolution 13 bit U/I/resistance/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time;
1x 40-pole
VICPAS supply 6AG1331-1KF02-7AB0 Siemens S7 300 Simatic Module Plastic Case Cover Replacement Part. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the 6AG1331-1KF02-7AB0 Siemens SIMATIC SM 331 analog input modules Case Parts.
| Part Number : | 6AG1331-1KF02-7AB0 |
| Atmospheric pressure: | 1080 to 660 hPa |
| Temperature: | –40 °C to +70°C |
| Warranty: | 365 days Warranty |
| Product Line: | Siemens Simatic S7-300 |
| Dimensions W x H x D (mm): | 40 x 120.4 x 110.8 |
| Safety isolation: | SELV circuit |
| Power consumption: | 57 W |
| Power loss: | Typ. 9 W |
| Efficiency: | 84 % |
Related Siemens Simatic S7-300 Part No. :
| Siemens Simatic S7-300 | Description | Inventory status |
| 6AG1322-1FH00-7AA0 | Siemens S7-300 SM 322 Plastic Case Replacement | In Stock |
| 6AG1322-1HF10-2AA0 | SIMATIC S7 300 SM322 HMI Enclosure Replacement | In Stock |
| 6AG1322-1HH01-2AA0 | SIMATIC S7 300 Plastic Case SM 322 Replacement | Available Now |
| 6AG1322-5FF00-4AB0 | Siemens S7-300 SM 322 Housing Repair Replacement | Available Now |
| 6AG1322-5HF00-4AB0 | Siemens S7-300 Plastic Shell SM 322 Repair | In Stock |
| 6AG1322-8BF00-2AB0 | SIMATIC S7 300 HMI Case SM 322 Replacement | Available Now |
| 6AG1323-1BH01-2AA0 | Siemens S7-300 SM 323 Housing Replacement | In Stock |
| SIPLUS S7 300 PLC | Description | Inventory status |
Siemens SIMATIC S7-300 HMI Manuals PDF Download:
FAQ:
Question: Putting a New 6AG1331-1KF02-7AB0 Plastic Case Cover Body Module into Service
Answer: Proceed as follows to put the new module into service:
1. Open the front panel.
2. Reinstall the front connector.
3. Close the front panel.
4. Switch the load voltage back on.
5. Set the CPU to RUN mode again.
Question: When should I use expansion devices?
Answer: You can use EDs if the number of CU slots is insufficient for your application.
When using EDs, you might require further power supply modules in addition to the extra module racks and interface modules (IM). When using interface modules, you must ensure compatibility of the partner stations.
Common misspellings:
6AG1331-1KF02-7A0AG1331-1KF02-7AB0
6AG1331-1KF02-A7B0
6AG1331-1KF02-7A80
6AG11331-1KF02-7AB0
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
