Quick Service for Full HMI Parts Replacement
Home / All / for Siemens / SIMATIC IPC 477 /

IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen Panel

IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen Panel

IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen Panel
IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen PanelIPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen PanelIPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen PanelIPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen PanelIPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen Panel
CategoriesSIMATIC IPC 477
BrandVICPAS
Model6AV7250-6GD07-0PA0
Touch screen panel typeCapacitive
Size19 inch
BrandSiemens
Warranty365 Days
Product Number6AV7 250-6GD07-0PA0
Product LineSIMATIC IPC477D PRO
Shipping2-4 Days
Supply PartTouch Screen Film
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, T/T, PayPal, Credit Card
Update TimeNov 22,2024
Detail Information

SIMATIC IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen Monitor Replacement Repair


Siemens IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Screen Panel Replacement

Notes on mounting

The Simatic 6AV7 250-6GD07-0PA0 Touch Screen must be mounted securely. Inadequately dimensioned fasteners may cause the 6AV72506GD070PA0 Touch Panel to fall down. Serious physical injury may result. Make sure that fasteners are adequately dimensioned during installation. Make sure to consider the weight and the forces acting on the Siemens 6AV7250-6GD07-0PA0 HMI Touch Glass when dimensioning. This applies in particular to dynamic load of the device. All fasteners including mounting surfaces, support arm systems, and fastening elements such as screws must be able to carry at least four times the weight of the device. Observe any further statutory specifications applying at the location of use of the 6AV7 250-6GD07-0PA0 Touch Membrane and further applicable regulations with regard to fastening the device.
If you are using a support arm system or a pedestal system that does not have IP65 degree of protection or Enclosure Type 4X / 12 (indoor use only), IP65 degree of protection and Enclosure Type 4X / 12 (indoor use only) are voided for the entire device. Spray and water jets as well as penetrating substances can then damage the Simatic 6AV72506GD070PA0 Touch Digitizer Glass. Only use a support arm system or pedestal system that has IP65 degree of protection and Enclosure Type 4X / 12 (indoor use only).





Specifications:

The table below describes the parameters of the Siemens IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Digitizer Glass.

Touch Size: 19''
Resolution: 1366 x 768 Pixels
Product Line: SIMATIC IPC477D PRO
Front Panel: IP65
Part Number: 6AV72506GD070PA0
Environment: Free From Corrosive Gases
Brand: Siemens
Relative Humidity: 90%
Storage Temperature: -20°C~60°C
Warranty: 365 Days


Related SIMATIC IPC477 Series HMI Part No. :

SIEMENS IPC477 HMI Description Inventory status
6AV7250-3EC07-0HA0 SIMATIC IPC 477D PRO Touch Screen Monitor In Stock
6AV7250-6GD07-0PA0 SIEMENS IPC477D PRO MMI Touch Screen Repair Available Now
6AV7250-7ED07-0PA0 SIMATIC IPC 477D PRO Touch Digitizer Replacement In Stock
6AV7250-0FB03-0BA0 SIMATIC IPC477D PRO Touch Screen Replacement Available Now
6AV7254-3DD00-0AS0 SIMATIC IPC 477D PRO Touch Panel Replacement In Stock
SIMATIC IPC477 HMI Description Inventory status

SIMATIC IPC477 Series Manuals PDF Download:

  • ipc477d-pro_operating_instructions_enUS_en-US
  • Siemens SIMATIC IPC477E Operating Instructions Manual_compressed

  • FAQ:

    Question: Can I clean Siemens IPC477D PRO 6AV7 250-6GD07-0PA0 HMI Touch Glass?

    Answer: Yes. But make sure to turn off the HMI device before cleaning it. If you clean the glass front while it is on, you might accidentally trigger the touchscreen.


    Question: What kind of ambient conditions should I keep and use Simatic IPC 477D PRO 6AV7250-6GD07-0PA0 Touch Membrane?

    Answer:
    1. Against dust, moisture and heat.
    2. Do not expose to direct sunlight or to other strong sources of light.
    3. Without additional safety measures, such as a supply of clean air, 6AV72506GD070PA0 Touchscreen may not be used in locations with harsh operating conditions caused by acidic vapors or gases.
    4. Always use suitable cleaning agents.

    Common misspellings: 

    6AV2750-6GD07-0PA0
    6AV7250-6G07-0PA0
    6AV7250-6GD07-P0A0
    6AV7250-26GD07-0PA0
    6AV725-6GD07-0P0
    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web