Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG2A, HG2S, FT1A 3.8-inch PLC+HMI /

IDEC HG2S-SB32YH-A3 Touch Screen Glass Replacement

IDEC HG2S-SB32YH-A3 Touch Screen Glass Replacement

IDEC HG2S-SB32YH-A3 Touch Screen Glass Replacement
CategoriesHG2A, HG2S, FT1A 3.8-inch PLC+HMI
BrandVICPAS
ModelHG2S-SB32YH-A3
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Screen Panel
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeDec 25,2024
Detail Information

IDEC HG2S Series HG2S-SB32YH-A3 Touch Screen Film Replacement


IDEC HG2S-SB32YH-A3 Touch Screen Monitor for repair replacement

Instruction for protective sheet

The Protective Sheet of HG2S-SB32YH-A3 Touch Membrane is replaceable, transparent sheet to protect a display of HG series. With the protective sheet covered on the display, you can operate touch switches.
1. Wipe any dirt off the HG2S-SB32YH-A3 Touch Screen Glass using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the HG2S-SB32YH-A3 Touch Screen Film, then apply the protective sheet onto the display. Care should be taken to avoid the ingress of air.
4. On the top of the protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the display of HG series.

When a protective sheet of HG2S-SB32YH-A3 HMI Touch Glass gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. This HG2S-SB32YH-A3 Touch Digitizer has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.





Specifications:

The table below describes the parameters of the IDEC HG2S-SB32YH-A3 Touch Screen HMI.

Brand: IDEC
Mounting: Panel Mounting
Degree of protection: IP65
Touchscreen: Analog Resistive
Warranty: 1-Year Warranty
Display Type: TFT Color
Screen Type: Analog Resistive Film
Model Number: HG2S-SB32YH-A3
Operating Temperature: 0 ~ 40°C
Storage Temperature: -20 ~ 60°C


Related IDEC HMI No. :

IDEC HMI Description Inventory status
HG2S-SB32BH-A3 IDEC HG2S Series Touch Screen Panel Replacement In Stock
HG2S-SB32BH-S IDEC HG2S Series Touch Digitizer Glass Repair Available Now
HG2S-SB32YH-S IDEC HG2S Series Touch Screen Glass Repair Available Now
HG2S-SB62BH-A3 IDEC HG2S Series Touch Screen Display Replacement In Stock
HG2S-SB62BH-A5 IDEC HG2S Series Touchscreen Monitor Replacement In Stock
HG2S-SB62BH-S IDEC HG2S Series Touch Screen Tablet Repair Available Now
HG2S-SB62YH-A3 IDEC HG2S Series Touch Screen Film Replacement In Stock
HG2S-SB62YH-S IDEC HG2S Series HMI Touch Membrane Repair Available Now
HG2S-SS32BH-A3 IDEC HG2S Series Touch Screen Glass Replacement In Stock
HG2S-SS32BH-S IDEC HG2S Series Touch Screen Panel Repair Available Now
HG2S-SS32YH-A3 IDEC HG2S Series Touch Digitizer Glass Repair Available Now
HG2S-SS32YH-S IDEC HG2S Series Touch Panel Repair Available Now
HG2S-SS62BH-A3 IDEC HG2S Series MMI Touch Glass Repair Available Now
HG2S-SS62BH-S IDEC HG2S Series Touch Screen Membrane Repair Available Now
HG2S-SS62YH-A3 IDEC HG2S Series Touch Screen Display Repair Available Now
HG2S-SS62YH-S IDEC HG2S Series HMI PAnel Screen Repair Available Now
IDEC HMI Description Inventory status

IDEC HG2S Series Manuals PDF Download:

  • IDEC-HMI-Selection-Guide
  • IDEC-Data-File-Manager-Users-Manual

  • FAQ:

    Question: What should I pay attention to during operation?

    Answer: During operation, the screen becomes blank when the backlight is burnt out; however, the touch panel of HG2S-SB32YH-A3 Terminal remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.


    Question: What are the screen types of HG2S-SB32YH-A3 machine?

    Answer: The screen types of HG2S-SB32YH-A3 HMI are base screen, popup screen and system screen.


    Question: How to maintain HG2S-SB32YH-A3 HMI Touch Glass?

    Answer: To wipe off smears on the lens and the surfaces of HG2S-SB32YH-A3 Touch Screen, use a soft cloth dampened with the following solvents. Use neutral detergent(squeeze the cloth tightly) or alcoholic solvents. Do not use solvents such as thinner, ammonia, strong acid and strong alkaline.

    Common misspellings: 

    HG2S-B32YH-A3

    HG2S-SSB32YH-A3

    HG2S-SB32Y-HA3

    HG2S-SB32YHA-3

    HG2S-SB32YH-3A

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web