IDEC HG2S-SB62BH-A3 Touch Screen Membrane Repair

Operating environment for HG2S-SB62BH-A3 Touchscreen

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC HG2S-SB62BH-A3 Touch Screen Tablet.
5. Where strong ultraviolet rays fall on the HG2S.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC HG2S-SB62BH-A3 HMI Panel Glass is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.

Ambient Temperature of IDEC HG2S-SB62BH-A3 Touch Membrane

The HG2S is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the HG2S. Allow 100mm minimum clearance above and below the HG2S. Do not install the HG2S where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the HG2S-SB62BH-A3 Touch Digitizer Glass in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.