Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG2A, HG2S, FT1A 3.8-inch PLC+HMI /

IDEC HG2S-SB62BH-A5 MMI Touch Screen Monitor Repair

IDEC HG2S-SB62BH-A5 MMI Touch Screen Monitor Repair

IDEC HG2S-SB62BH-A5 MMI Touch Screen Monitor Repair
CategoriesHG2A, HG2S, FT1A 3.8-inch PLC+HMI
BrandVICPAS
ModelHG2S-SB62BH-A5
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Screen Display
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeNov 23,2024
Detail Information

IDEC HG2S Series HG2S-SB62BH-A5 HMI Panel Screen Replacement


IDEC HG2S-SB62BH-A5 Touch Panel for repair replacement

Maintenance and Inspection of HG2S-SB62BH-A5 Touch Screen Display

Maintain and inspect the IDEC HG2S-SB62BH-A5 Touch Digitizer Glass periodically to ensure the best performance. Do not disassemble, repair, or modify the HG2S-SB62BH-A5 MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.


Adjusting the HG2S-SB62BH-A5 Touch Panel

A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.


Panel Cut-out Dimensions of HG2S-SB62BH-A5 Touchscreen

Place the IDEC HG2S in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the HG2S-SB62BH-A5 Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.


Note for operation

The screen becomes blank when the backlight is burnt out; however, the HG2S-SB62BH-A5 Touch Digitizer Glass remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.





Specifications:

The table below describes the parameters of the IDEC HG2S-SB62BH-A5 Touch Screen Monitor HMI.

Corrosion Immunity: Free from corrosive gases
Operating Humidity: 20 to 85% RH
Product Line: HG2S Series
Storage Temperature: -20 ~ 60°C
Operating Temperature: 0 ~ 40°C
Brand: IDEC
Model Number: HG2S-SB62BH-A5
Warranty: 1-Year Warranty
Mounting: Panel Mounting
Degree of Protection: IP65


Related IDEC HMI No. :

IDEC HMI Description Inventory status
HG2S-SB32BH-A3 IDEC HG2S Series Touch Screen Panel Replacement In Stock
HG2S-SB32BH-S IDEC HG2S Series Touch Digitizer Glass Repair Available Now
HG2S-SB32YH-A3 IDEC HG2S Series Touch Screen Film Replacement In Stock
HG2S-SB32YH-S IDEC HG2S Series Touch Screen Glass Repair Available Now
HG2S-SB62BH-A3 IDEC HG2S Series Touch Screen Display Replacement In Stock
HG2S-SB62BH-S IDEC HG2S Series Touch Screen Tablet Repair Available Now
HG2S-SB62YH-A3 IDEC HG2S Series Touch Screen Film Replacement In Stock
HG2S-SB62YH-S IDEC HG2S Series HMI Touch Membrane Repair Available Now
HG2S-SS32BH-A3 IDEC HG2S Series Touch Screen Glass Replacement In Stock
HG2S-SS32BH-S IDEC HG2S Series Touch Screen Panel Repair Available Now
HG2S-SS32YH-A3 IDEC HG2S Series Touch Digitizer Glass Repair Available Now
HG2S-SS32YH-S IDEC HG2S Series Touch Panel Repair Available Now
HG2S-SS62BH-A3 IDEC HG2S Series MMI Touch Glass Repair Available Now
HG2S-SS62BH-S IDEC HG2S Series Touch Screen Membrane Repair Available Now
HG2S-SS62YH-A3 IDEC HG2S Series Touch Screen Display Repair Available Now
HG2S-SS62YH-S IDEC HG2S Series HMI PAnel Screen Repair Available Now
IDEC HMI Description Inventory status

IDEC HG2S Series Manuals PDF Download:

  • IDEC-HMI-Selection-Guide
  • IDEC-Data-File-Manager-Users-Manual

  • FAQ:

    Question: How do I calibrate the touch screen on the HG2S-SB62BH-A5 HMI?

    Answer: To calibrate the touch panel of HG2S-SB62BH-A5, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: How to install HG2S-SB62BH-A5 Terminal?

    Answer:
    How to install HG2S-SB62BH-A5 Terminal?

    Common misspellings: 

    G2S-SB62BH-A5

    HG2SSB62BH-A5

    HG2S-SB62BHA5

    HG2S-SB62BH--A5

    HG2S-SB62BHA-5

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web