Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG1F, HG2F, HG3F, HG4F /

IDEC HG3F-FT22TF-W Touch Screen Monitor Repair

IDEC HG3F-FT22TF-W Touch Screen Monitor Repair

IDEC HG3F-FT22TF-W Touch Screen Monitor Repair
IDEC HG3F-FT22TF-W Touch Screen Monitor RepairIDEC HG3F-FT22TF-W Touch Screen Monitor RepairIDEC HG3F-FT22TF-W Touch Screen Monitor Repair
CategoriesHG1F, HG2F, HG3F, HG4F
BrandVICPAS
ModelHG3F-FT22TF-W
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Screen Film
Display Size10.4 inches
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeNov 9,2024
Detail Information

IDEC HG3F Series HG3F-FT22TF-W HMI Panel Screen Replacement


IDEC HG3F-FT22TF-W Touch Panel for repair replacement

Maintenance and Inspection of HG3F-FT22TF-W Touch Screen Display

Maintain and inspect the IDEC HG3F-FT22TF-W Touch Digitizer Glass periodically to ensure the best performance. Do not disassemble, repair, or modify the HG3F-FT22TF-W MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.


Adjusting the HG3F-FT22TF-W Touch Panel

A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.


Panel Cut-out Dimensions of HG3F-FT22TF-W Touchscreen

Place the IDEC HG3F in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the HG3F-FT22TF-W Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.


Note for operation

The screen becomes blank when the backlight is burnt out; however, the HG3F-FT22TF-W Touch Screen Glass remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.





Specifications:

The table below describes the parameters of the IDEC HG3F-FT22TF-W Touch Screen Monitor HMI.

Corrosion Immunity: Free from corrosive gases
Operating Humidity: 20 to 85% RH
Product Line: HG3F Series
Storage Temperature: -20 ~ 60°C
Operating Temperature: 0 ~ 50°C
Brand: IDEC
Model Number: HG3F-FT22TF-W
Warranty: 1-Year Warranty
Mounting: Panel Mounting
Display Size: 10.4"


Related IDEC HMI No. :

IDEC HMI Description Inventory status
HG1F-SB22BF-B IDEC HG1F Series Touch Screen Panel Front Overlay Replacement In Stock
HG1F-SB22BF-S IDEC HG1F Series Protective Film Touch Digitizer Glass Repair Available Now
HG1F-SB22BF-W IDEC HG1F Series Touch Digitizer Overlay Film Replacement In Stock
HG1F-SB22YF-B IDEC HG1F Series Touch Screen Glass Protective Film Repair Available Now
HG1F-SB22YF-S IDEC HG1F Series Touch Screen Display Front Overlay Replacement In Stock
HG1F-SB22YF-W IDEC HG1F Series Overlay Film HMI Panel Screen Repair Available Now
HG2F-SB22VCF IDEC HG2F Series Touchscreen Monitor LCD Display Replacement In Stock
HG2F-SB22VDF IDEC HG2F Series LCD Screen Touch Screen Film Repair Available Now
HG2F-SB22VF IDEC HG2F Series Touch Digitizer LCD Display Screen Replacement In Stock
HG2F-SB52VCF IDEC HG2F Series LCD Display Panel Touch Membrane Repair Available Now
HG2F-SB52VDF IDEC HG2F Series Touch Screen Tablet LCD Screen Replacement In Stock
HG2F-SB52VF IDEC HG2F Series LCD Display Touch Screen Panel Repair Available Now
HG2F-SS22VCF IDEC HG2F Series Touch Screen Tablet LCD Display Panel Replacement In Stock
HG2F-SS22VDF IDEC HG2F Series LCD Screen Touch Screen Monitor Replacement Available Now
HG2F-SS22VF IDEC HG2F Series Touch Screen Glass LCD Display Screen Replacement In Stock
IDEC HMI Description Inventory status

IDEC HG3F Series Manuals PDF Download:

  • IDEC-HMI-Selection-Guide
  • IDEC-Data-File-Manager-Users-Manual

  • FAQ:

    Question: How do I calibrate the touch screen on the HG3F-FT22TF-W HMI?

    Answer: To calibrate the touch panel of HG3F-FT22TF-W, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: How to install HG3F-FT22TF-W Terminal?

    Answer:
    How to install HG3F-FT22TF-W Terminal?

    Common misspellings: 

    G3F-FT22TF-W

    HG3FFT22TF-W

    HG3F-FT22T-W

    HG3F--FT22TF-W

    HG3F-FT22TFW-

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web