IDEC HG2F-SB22VCF Touch Screen Panel LCD Display Repair
IDEC HG2F-SB22VCF Touch Screen Panel LCD Display Repair
Categories | HG1F, HG2F, HG3F, HG4F |
---|---|
Brand | VICPAS |
Model | HG2F-SB22VCF |
Warranty | 365 Days |
Shipping | 2-4 workdays |
Brand | IDEC |
Supply Parts | Touch Digitizer LCD Display |
Display Size | 5.7 inches |
FOB port | Guangzhou, Shenzhen, Hongkong |
Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union |
Update Time | Nov 22,2024 |
IDEC HG2F Series HG2F-SB22VCF Touch Screen Film LCD Display Replacement
Order each part separately is available
Mounting
Place the HG2F-SB22VCF LCD Display Touch Screen Glass in a panet cut-out and fasten with the attached mounting clips at four places uniformly. Do not tighten excessively, otherwise the HG2F may be defommed or damaged. When installing the HG2F-SB22VCF LCD Display Panel Touch Membrane vertically, make sure that the power input terminal is on the upper side. If the mounting clips are tightened obliquely to the panel, the IDEC HG2F may fall off the panel. Please attach this product to press down HG2F-SB22VCF Touch Digitizer Glass LCD Screen in the portion of the mountain of gasket. Once removing especially in the attaching again, be careful. There is a possibility that it may become impossible to maintain waterproof ability.
Notes for Operation
The screen becomes blank when the backlight is burnt out; however, the HG2F-SB22VCF LCD Display Touchscreen remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Please note that this erroneous operation may result in damage. At temperatures over the rated operating temperature, the clock accuracy is affected. Adjust the clock before use. For applications which require clock accuracy, adjust the clock periodically. When more than one button is pressed at the same time, due to the detection characteristics of HG2F-SB22VCF Touch Panel LCD Screen, only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed. Thus, when more than one button is pressed simultaneously, the resulting operation is not guaranteed.
Specifications:
The table below describes the parameters of the IDEC HG2F-SB22VCF LCD Screen Touch Membrane HMI.
Operating Humidity: | 10 to 90% RH |
Operating Temperature: | 0 ~ 50°C |
Product Line: | HG2F Series |
Storage Temperature: | -20 ~ 60°C |
Brand: | IDEC |
Model Number: | HG2F-SB22VCF |
Display Size: | 5.7" |
Warranty: | 1-Year Warranty |
Screen Type: | Analog Resistive Film |
Corrosion Immunity: | Free from corrosive gases |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG2F-SS52VCF | IDEC HG2F Series Touch Screen Panel LCD Screen Replacement | In Stock |
HG2F-SS52VDF | IDEC HG2F Series LCD Display Touch Digitizer Glass Repair | Available Now |
HG2F-SS52VF | IDEC HG2F Series Touch Digitizer LCD Display Panel Replacement | In Stock |
HG3F-FT22TFB | IDEC HG3F Series Touch Screen Glass Repair | Available Now |
HG3F-FT22TF-B | IDEC HG3F Series Touch Screen Display Replacement | In Stock |
HG3F-FT22TFW | IDEC HG3F Series HMI Panel Screen Repair | Available Now |
HG3F-FT22TF-W | IDEC HG3F Series Touchscreen Monitor Replacement | In Stock |
HG3F-FT22VF-B | IDEC HG3F Series Touch Screen Film Repair | Available Now |
HG3F-FT22VF-W | IDEC HG3F Series Touch Digitizer Glass Replacement | In Stock |
HG4F-JT22TFB | IDEC HG4F Series MMI Touch Membrane Repair | Available Now |
HG4F-JT22TF-B | IDEC HG4F Series Touch Screen Tablet Replacement | In Stock |
HG4F-JT22TF-EX | IDEC HG4F Series Touch Screen Panel Repair | Available Now |
HG4F-JT22TFW | IDEC HG4F Series Touch Screen Monitor Replacement | In Stock |
HG4F-JT22TF-W | IDEC HG4F Series Touch Screen Display Replacement | Available Now |
HG4F-JT22VF-B | IDEC HG4F Series Touch Screen Glass Replacement | In Stock |
HG4F-JT22VF-W | IDEC HG4F Series Touch Screen Film Replacement | Available Now |
IDEC HMI | Description | Inventory status |
IDEC HG2F Series Manuals PDF Download:
FAQ:
Question: Can I connect external devices to the HG2F-SB22VCF Machine?
Answer: Yes, the HG2F-SB22VCF HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Question: How do I calibrate the touch screen on the HG2F-SB22VCF HMI?
Answer: To calibrate the touch panel of HG2F-SB22VCF, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
Common misspellings:
G2F-SB22VCF
HG2-SB22VCF
HG2F-SB22VC
HG2F-SB22VCFF
HG2F-SB22CVF
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content