IDEC HG1F-SB22BF-W Touch Membrane Overlay Film Repair

Order each part separately is available

Operating environment for HG1F-SB22BF-W Touchscreen Protective Film

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC HG1F-SB22BF-W Front Overlay Touch Screen Tablet.
5. Where strong ultraviolet rays fall on the HG1F.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC HG1F-SB22BF-W HMI Panel Glass Overlay Film is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.

Ambient Temperature of IDEC HG1F-SB22BF-W Protective Film Touch Membrane

The HG1F is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the HG1F. Allow 100mm minimum clearance above and below the HG1F. Do not install the HG1F where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the HG1F-SB22BF-W Touch Digitizer Glass Overlay Film in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.