Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG2A, HG2S, FT1A 3.8-inch PLC+HMI /

IDEC FT1A-M14KA-B Touch Screen Display Replacement

IDEC FT1A-M14KA-B Touch Screen Display Replacement

IDEC FT1A-M14KA-B Touch Screen Display Replacement
CategoriesHG2A, HG2S, FT1A 3.8-inch PLC+HMI
BrandVICPAS
ModelFT1A-M14KA-B
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Screen Monitor
Display Size3.7 inches
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeNov 23,2024
Detail Information

IDEC FT1A 3.8IN PLC+HMI FT1A-M14KA-B Touch Screen Tablet Replacement


IDEC FT1A 3.8IN PLC+HMI HMI Parts FT1A-M14KA-B Touch Digitizer for repair replacement

Protective Sheet of IDEC FT1A-M14KA-B Touch Panel

1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the FT1A-M14KA-B Touch Screen Display, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the FT1A-M14KA-B HMI Touch Glass.
5. When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. FT1A-M14KA-B Touch Membrane has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
6. Make sure that the specifications of the product conform to your requirements, and that no parts are missing or damaged due to accidents during transportation.


Mounting Caution

If the mounting clips are tightened obliquely to the panel, the FT1A-M14KA-B HMI Panel Screen may fall off the panel. When installing the IDEC FT1A into a panel cut-out, make sure that the gasket is not twisted especially when re-installing, take special care because any twists in the gasket will impair the waterproof characteristics.





Specifications:

The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-M14KA-B Touch Screen Panel HMI.

Product Line: FT1A 3.8IN PLC+HMI
Operating Humidity: 10 to 90% RH
Degree of Protection: IP65
Storage Temperature: -20 ~ 70°C
Display Type: TFT Color
Screen Type: Analog Resistive Film
Model Number: FT1A-M14KA-B
Operating Temperature: -20 ~ 60°C
Warranty: 1-Year Warranty
Brand: IDEC


Related IDEC FT1A 3.8IN PLC+HMI No. :

FT1A 3.8IN PLC+HMI Description Inventory status
FT1A-C12RA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement In Stock
FT1A-C12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair Available Now
FT1A-C14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-C14KA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair Available Now
FT1A-C14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement In Stock
FT1A-C14SA-S IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair Available Now
FT1A-M12RA-B IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement In Stock
FT1A-M12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair Available Now
FT1A-M14KA-S IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair Available Now
FT1A-M14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement In Stock
FT1A-M14SA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair Available Now
FT1A 3.8IN PLC+HMI Description Inventory status

IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:

  • IDEC-FT1A-SmartAXIS-Brochure
  • IDEC-FT1A-Touch-Datasheet

  • FAQ:

    Question: How to adjust FT1A-M14KA-B Touchscreen Glass?

    Answer:
    How to adjust FT1A-M14KA-B Touchscreen Glass?
    How to adjust FT1A-M14KA-B Touchscreen Glass?


    Question: What is the size of the base screen of FT1A-M14KA-B Terminal?

    Answer: It is equal the size of FT1A-M14KA-B touch screen.

    Common misspellings: 

    T1A-M14KA-B

    FT1AM14KA-B

    FFT1A-M14KA-B

    FT1A-M14KAA-B

    FT1A-M14KAB-

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web