Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG2A, HG2S, FT1A 3.8-inch PLC+HMI /

IDEC FT1A-C14KA-S Touch Screen Monitor Repair

IDEC FT1A-C14KA-S Touch Screen Monitor Repair

IDEC FT1A-C14KA-S Touch Screen Monitor Repair
CategoriesHG2A, HG2S, FT1A 3.8-inch PLC+HMI
BrandVICPAS
ModelFT1A-C14KA-S
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Screen Tablet
Display Size3.8 inches
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeNov 23,2024
Detail Information

IDEC FT1A 3.8IN PLC+HMI FT1A-C14KA-S HMI Touch Glass Replacement


IDEC FT1A 3.8IN PLC+HMI HMI Parts FT1A-C14KA-S Touch Panel for repair replacement

Maintenance and Inspection of FT1A-C14KA-S Touch Screen Display

Maintain and inspect the IDEC FT1A-C14KA-S Touch Digitizer Glass periodically to ensure the best performance. Do not disassemble, repair, or modify the FT1A 3.8IN PLC+HMI FT1A-C14KA-S MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.


Adjusting the FT1A-C14KA-S Touch Panel

A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.


Panel Cut-out Dimensions of FT1A-C14KA-S Touchscreen

Place the IDEC FT1A in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the FT1A-C14KA-S Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.


Note for operation

The screen becomes blank when the backlight is burnt out; however, the FT1A-C14KA-S Touch Digitizer remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.





Specifications:

The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-C14KA-S Touch Screen Monitor HMI.

Corrosion Immunity: Free from corrosive gases
Operating Humidity: 10 to 90% RH
Product Line: FT1A 3.8IN PLC+HMI
Storage Temperature: -20 ~ 70°C
Operating Temperature: -20 ~ 60°C
Brand: IDEC
Model Number: FT1A-C14KA-S
Warranty: 1-Year Warranty
Display Type: 256 Color LCD
Display Size: 3.8"


Related IDEC FT1A 3.8IN PLC+HMI No. :

FT1A 3.8IN PLC+HMI Description Inventory status
FT1A-C12RA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement In Stock
FT1A-C12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Digitizer Glass Repair Available Now
FT1A-C14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-C14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement In Stock
FT1A-C14SA-S IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair Available Now
FT1A-M12RA-B IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement In Stock
FT1A-M12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair Available Now
FT1A-M14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-M14KA-S IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair Available Now
FT1A-M14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement In Stock
FT1A-M14SA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair Available Now
FT1A 3.8IN PLC+HMI Description Inventory status

IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:

  • IDEC-FT1A-SmartAXIS-Brochure
  • IDEC-FT1A-Touch-Datasheet

  • FAQ:

    Question: How do I calibrate the touch screen on the FT1A-C14KA-S HMI?

    Answer: To calibrate the touch panel of FT1A-C14KA-S, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.


    Question: How to install FT1A-C14KA-S Terminal?

    Answer:
    How to install FT1A-C14KA-S Terminal?

    Common misspellings: 

    T1A-C14KA-S

    FT1A-C14KAS

    FT1A-C114KA-S

    FT1A-C14K-AS

    FT1A-C14KAS-

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web