Quick Service for Full HMI Parts Replacement
Home / All / IDEC / HG2A, HG2S, FT1A 3.8-inch PLC+HMI /

IDEC FT1A-C12RA-S MMI Touch Screen Monitor Repair

IDEC FT1A-C12RA-S MMI Touch Screen Monitor Repair

IDEC FT1A-C12RA-S MMI Touch Screen Monitor Repair
CategoriesHG2A, HG2S, FT1A 3.8-inch PLC+HMI
BrandVICPAS
ModelFT1A-C12RA-S
Warranty365 Days
Shipping2-4 workdays
BrandIDEC
Supply PartsTouch Screen Membrane Glass
Display Size3.8 inches
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
Update TimeNov 9,2024
Detail Information

IDEC FT1A 3.8IN PLC+HMI FT1A-C12RA-S Touch Screen Display Replacement


IDEC FT1A 3.8IN PLC+HMI HMI Parts FT1A-C12RA-S Touch Screen Tablet for repair replacement

Warning

1. Prevent the FT1A-C12RA-S Touch Screen Panel from falling while moving or transporting, otherwise damage or malfunction will result.
2. Use of the FT1A-C12RA-S Touch Screen Film in high-temperature or high-humidity environments, or in locations where it is exposed to condensation, corrosive gas or large shock loads can create the risk of electrocution and fire.
3. When more than one button is pressed at the same time, due to the detection characteristics of an analog type FT1A-C12RA-S HMI Touch Glass, only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed. Thus, don't operate the FT1A 3.8IN PLC+HMI by pressing more than one button simultaneously.
4. Do not push hard or scratch the FT1A-C12RA-S Touch Membrane protection sheet with a hard object such as a tool, because they are damaged easily.
5. Although the screen will not be visible if the backlight burns out, the touch panel will remain functional. Incorrect touch panel operation will occur when operating the FT1A-C12RA-S HMI Panel Glass when the backlight appears to be turned off but is actually burnt out. Because such an erroneous operation could result in damage, the touch panel should not be used after the backlight has burned out.
6. The touch panel of the IDEC FT1A is made of glass and will break if exposed to excessive shock. Take due care when handling it.
7. Do not install the FT1A-C12RA-S Touch Digitizer Glass in areas subjected to strong ultraviolet rays, since ultraviolet rays may impair the quality of the LCD.





Specifications:

The table below describes the parameters of the IDEC FT1A 3.8IN PLC+HMI FT1A-C12RA-S Touch Digitizer Glass HMI.

Degree of Protection: IP20
Warranty: 1-Year Warranty
Brand: IDEC
Corrosion Immunity : Free from Corrosive Gases
Product Line: FT1A 3.8IN PLC+HMI
Storage Temperature: -20 ~ 70°C
Display Type: TFT Color
Model Number: FT1A-C12RA-S
Operating Temperature: 0 ~ 55°C
Display Size: 3.8"


Related IDEC FT1A 3.8IN PLC+HMI No. :

FT1A 3.8IN PLC+HMI Description Inventory status
FT1A-C12RA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Replacement In Stock
FT1A-C14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-C14KA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Repair Available Now
FT1A-C14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Display Replacement In Stock
FT1A-C14SA-S IDEC FT1A 3.8IN PLC+HMI MMI Panel Screen Repair Available Now
FT1A-M12RA-B IDEC FT1A 3.8IN PLC+HMI Touchscreen Monitor Replacement In Stock
FT1A-M12RA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Tablet Repair Available Now
FT1A-M14KA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Film Replacement In Stock
FT1A-M14KA-S IDEC FT1A 3.8IN PLC+HMI HMI Touch Membrane Repair Available Now
FT1A-M14SA-B IDEC FT1A 3.8IN PLC+HMI Touch Screen Glass Replacement In Stock
FT1A-M14SA-S IDEC FT1A 3.8IN PLC+HMI Touch Screen Panel Repair Available Now
FT1A 3.8IN PLC+HMI Description Inventory status

IDEC FT1A 3.8IN PLC+HMI Manuals PDF Download:

  • IDEC-FT1A-SmartAXIS-Brochure
  • IDEC-FT1A-Touch-Datasheet

  • FAQ:

    Question: How to install FT1A-C12RA-S Touch Panel Terminal?

    Answer:
    How to install FT1A-C12RA-S Touch Panel Terminal?


    Question: How to adjust FT1A-C12RA-S Touchscreen Glass?

    Answer:
    How to adjust FT1A-C12RA-S Touchscreen Glass?
    How to adjust FT1A-C12RA-S Touchscreen Glass?

    Common misspellings: 

    F1A-C12RA-S

    FT1A-C12RAS

    FT1A-C12RA-SS

    FT1A-C12R-AS

    FT1A-C12RAS-

    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web