IDEC HG2G-5TN22TF-S HMI Screen Protective Film Repair
IDEC HG2G 5.7in Enhanced HG2G-5TN22TF-S Touch Membrane Front Overlay Replacement
Order each part separately is available
Safety Precautions
1. Prevent the IDEC HG2G-5TN22TF-S Touchscreen Protective Film from falling while moving or transporting, otherwise damage or malfunction of the Touch will result.
2. Improper installation will result in falling, failure, electrical shock, fire hazard, or malfunction of the Touch.
3. Any twists in the gasket and the Mounting Gasket will impair the waterproof characteristics.
4. The HG2G 5.7in Enhanced HG2G-5TN22TF-S Front Overlay Touch Panel is made of glass and will break if exposed to excessive shock. Take due care when handling it.
5. Do not push hard or scratch the touch panel and protection sheet with a hard object such as a tool, because they are damaged easily.
6. Do not tighten the mounting clips obliquely to the panel or excessively, otherwise the IDEC HG2G-5TN22TF-S HMI Panel Glass Overlay Film may warp and cause wrinkle on the display, or the waterproof characteristics may be impaired.
7. The HG2G-5TN22TF-S Overlay Film Touch Digitizer Glass uses an LCD(liquid crystal display) as a display device. The liquid inside the LCD is harmful to the skin. If the LCD is broken and the liquid attaches to your skin or clothes, wash the liquid off using soap, and consult a doctor immediately.
8. Turn off the power to the Touch before installation, removal, wiring, maintenance, and inspection of the Touch. Failure to turn power off may cause electrical shock or fire hazard.
9. Emergency and interlocking circuits must be configured outside of the HG2G-5TN22TF-S Front Overlay Touch Membrane. Do not use the Touch's internal touch switches for an emergency circuit. If the Touch failed, the external equipment connected to the Touch will no longer be protected and serious injury to operators and equipment damage may be caused.
10. Special expertise is required to install, wire, configure, and operate the HG2G-5TN22TF-S Touch Panel Protective Film. People without such expertise must not use the Touch.
Specifications:
The table below describes the parameters of the IDEC HG2G 5.7in Enhanced HG2G-5TN22TF-S Front Overlay Touch Screen Film HMI.
Warranty: | 1-Year Warranty |
Brand: | IDEC |
Corrosion Immunity: | Free from corrosive gases |
Storage Temperature: | -20 ~ 70°C |
Storage Humidity: | 10 to 90% RH |
Display Size: | 5.7" |
Model Number: | HG2G-5TN22TF-S |
Resolution: | 320 x 240 Pixels |
Screen Type: | Analog Resistive Film |
Display Type: | Monochrome |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG2G-5TN22TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Glass Front Overlay Replacement | In Stock |
HG2G-5TN22TF-W | IDEC HG2G 5.7in Enhanced HMI Panel Screen Protective Film Repair | Available Now |
HG2G-5TT22TF-B | IDEC HG2G 5.7in Enhanced Touch Digitizer Overlay Film Replacement | In Stock |
HG2G-5TT22TF-S | IDEC HG2G 5.7in Enhanced Touch Screen Glass Protective Film Repair | Available Now |
HG2G-5TT22TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Display Front Overlay Replacement | In Stock |
HG2G-SB21TF-B | IDEC HG2G 5.7in Enhanced Protective Film HMI Panel Screen Repair | Available Now |
HG2G-SB21TF-S | IDEC HG2G 5.7in Enhanced Touchscreen Monitor Front Overlay Replacement | In Stock |
HG2G-SB21TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Film Protective Film Repair | Available Now |
HG2G-SB21VF-B | IDEC HG2G 5.7in Enhanced Front Overlay Touch Monitor Replacement | In Stock |
HG2G-SB21VF-S | IDEC HG2G 5.7in Enhanced Protective Film Touch Membrane Repair | Available Now |
HG2G-SB21VF-W | IDEC HG2G 5.7in Enhanced Touch Screen Tablet Front Overlay Replacement | In Stock |
HG2G-SB22TF-B | IDEC HG2G 5.7in Enhanced Front Overlay Touch Screen Panel Repair | Available Now |
HG2G-SB22TF-S | IDEC HG2G 5.7in Enhanced Touch Screen Tablet Protective Film Replacement | In Stock |
IDEC HMI | Description | Inventory status |
IDEC HG2G 5.7in Enhanced Manuals PDF Download:
FAQ:
Question: What are the accessories of IDEC HG2G-5TN22TF-S Machine?
Answer:
Question: Can I connect external devices to the HG2G-5TN22TF-S HMI?
Answer: Yes, the HG2G-5TN22TF-S HMI typically offers various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Common misspellings:
G2G-5TN22TF-S
HG2G5TN22TF-S
HG2G-5TN22T-S
HG2G-55TN22TF-S
HG2G-5TN22T-FS
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content