IDEC HG2G-5TT22TF-B Touch Panel Front Overlay Repair
IDEC HG2G 5.7in Enhanced HG2G-5TT22TF-B Touch Screen Monitor Protective Film Replacement
Order each part separately is available
Mounting
Place the HG2G-5TT22TF-B Front Overlay Touch Screen in a panet cut-out and fasten with the attached mounting clips at four places uniformly. Do not tighten excessively, otherwise the IDEC HG2G may be defommed or damaged. When installing the HG1F vertically, make sure that the power input terminal is on the upper side. If the mounting clips are tightened obliquely to the panel, the HG2G-5TT22TF-B Protective Film HMI Panel Screen may fall off. Please attach this product to press down a panel in the portion of the mountain of gasket. Once removing especially in the attaching again, be careful. There is a possibility that it may become impossible to maintain waterproof ability.
Notes for Operation
The screen becomes blank when the backlight is burnt out; however, the HG2G-5TT22TF-B Touch Panel Overlay Film remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Please note that this erroneous operation may result in damage.
At temperatures over the rated operating temperature, the clock accuracy is affected. Adjust the clock before use. For applications which require clock accuracy, adjust the clock periodically. When more than one button is pressed at the same time, due to the detection characteristics of HG2G-5TT22TF-B Protective Film Touch Screen Monitor, only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed. Thus, when more than one button is pressed simultaneously, the resulting operation of HG2G-5TT22TF-B HMI Touch Glass Front Overlay is not guaranteed.
Specifications:
The table below describes the parameters of the IDEC HG2G 5.7in Enhanced HG2G-5TT22TF-B Touch Digitizer Glass Protective Film HMI.
Screen Type: | Analog Resistive Film |
Brand: | IDEC |
Product Line: | HG2G 5.7in Enhanced |
Storage Temperature: | -20 ~ 70°C |
Warranty: | 1-Year Warranty |
Display Size: | 5.7" |
Operating Humidity: | 10 to 90% RH |
Operating Temperature: | -20 ~ 60°C |
Display Type: | TFT Color |
Model Number: | HG2G-5TT22TF-B |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG1G-4VT22TF-B | IDEC Compact HG1G Series Touch Screen Panel Front Overlay Replacement | In Stock |
HG1G-4VT22TF-S | IDEC Compact HG1G Series Protective Film Touch Digitizer Glass Repair | Available Now |
HG2G-5FT22TF-B | IDEC HG2G 5.7in Enhanced Touch Digitizer Overlay Film Replacement | In Stock |
HG2G-5FT22TF-S | IDEC HG2G 5.7in Enhanced Touch Screen Glass Protective Film Repair | Available Now |
HG2G-5FT22TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Display Front Overlay Replacement | In Stock |
HG2G-5ST22TF-B | IDEC HG2G 5.7in Enhanced Protective Film HMI Panel Screen Repair | Available Now |
HG2G-5ST22TF-S | IDEC HG2G 5.7in Enhanced Touchscreen Monitor Front Overlay Replacement | In Stock |
HG2G-5ST22TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Film Protective Film Repair | Available Now |
HG2G-5ST22VF-B | IDEC HG2G 5.7in Enhanced Front Overlay Touch Monitor Replacement | In Stock |
HG2G-5ST22VF-S | IDEC HG2G 5.7in Enhanced Protective Film Touch Membrane Repair | Available Now |
HG2G-5ST22VF-W | IDEC HG2G 5.7in Enhanced Touch Screen Tablet Front Overlay Replacement | In Stock |
HG2G-5TN22TF-B | IDEC HG2G 5.7in Enhanced Front Overlay Touch Screen Panel Repair | Available Now |
HG2G-5TN22TF-S | IDEC HG2G 5.7in Enhanced Touch Screen Tablet Protective Film Replacement | In Stock |
IDEC HMI | Description | Inventory status |
IDEC HG2G 5.7in Enhanced Manuals PDF Download:
FAQ:
Question: What is the size of the base screen of HG2G-5TT22TF-B Terminal?
Answer: It is equal the size of HG2G-5TT22TF-B Touch Screen.
Question: What are the screen types of HG2G-5TT22TF-B machine?
Answer: The screen types of HG2G-5TT22TF-B HMI are base screen, popup screen and system screen.
Question: How to maintain HG2G-5TT22TF-B Front Overlay HMI Touch Glass?
Answer: To wipe off smears on the lens and the surfaces of HG2G-5TT22TF-B Touch Panel Protective Film, use a soft cloth dampened with the following solvents. Use neutral detergent(squeeze the cloth tightly) or alcoholic solvents. Do not use solvents such as thinner, ammonia, strong acid and strong alkaline.
Common misspellings:
G2G-5TT22TF-B
HG2G-TT22TF-B
HG2G-5TT22TFB
HG2G-55TT22TF-B
HG2G-5TT22TFB-
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content