IDEC HG2G-5TT22TF-W Touch Membrane Front Overlay Repair
IDEC HG2G 5.7in Enhanced HG2G-5TT22TF-W Touch Screen Tablet Protective Film Replacement
Order each part separately is available
Protective Sheet of IDEC HG2G-5TT22TF-W Touch Panel Protective Film
1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the HG2G-5TT22TF-W Front Overlay Touch Screen Display, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the HG2G-5TT22TF-W Overlay Film HMI Touch Glass.
5. When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. HG2G-5TT22TF-W Touch Membrane Front Overlay has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
6. Make sure that the specifications of the product conform to your requirements, and that no parts are missing or damaged due to accidents during transportation.
Mounting Caution
If the mounting clips are tightened obliquely to the panel, the HG2G-5TT22TF-W Protective Film HMI Panel Screen may fall off the panel. When installing the IDEC HG2G into a panel cut-out, make sure that the gasket is not twisted especially when re-installing, take special care because any twists in the gasket will impair the waterproof characteristics.
Specifications:
The table below describes the parameters of the IDEC HG2G 5.7in Enhanced HG2G-5TT22TF-W Protective Film Touch Screen Display HMI.
| Operating Humidity: | 10 to 90% RH |
| Brand: | IDEC |
| Degree of Protection: | IP65 |
| Warranty: | 1-Year Warranty |
| Product Line: | HG2G 5.7in Enhanced |
| Brand: | IDEC |
| Model Number: | HG2G-5TT22TF-W |
| Operating Temperature: | -20 ~ 60°C |
| Storage Temperature: | -20 ~ 70°C |
| Screen Type: | Analog Resistive Film |
Related IDEC HMI No. :
| IDEC HMI | Description | Inventory status |
| HG1G-4VT22TF-B | IDEC Compact HG1G Series Touch Screen Panel Front Overlay Replacement | In Stock |
| HG1G-4VT22TF-S | IDEC Compact HG1G Series Protective Film Touch Digitizer Glass Repair | Available Now |
| HG2G-5FT22TF-B | IDEC HG2G 5.7in Enhanced Touch Digitizer Overlay Film Replacement | In Stock |
| HG2G-5FT22TF-S | IDEC HG2G 5.7in Enhanced Touch Screen Glass Protective Film Repair | Available Now |
| HG2G-5FT22TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Display Front Overlay Replacement | In Stock |
| HG2G-5ST22TF-B | IDEC HG2G 5.7in Enhanced Protective Film HMI Panel Screen Repair | Available Now |
| HG2G-5ST22TF-S | IDEC HG2G 5.7in Enhanced Touchscreen Monitor Front Overlay Replacement | In Stock |
| HG2G-5ST22TF-W | IDEC HG2G 5.7in Enhanced Touch Screen Film Protective Film Repair | Available Now |
| HG2G-5ST22VF-B | IDEC HG2G 5.7in Enhanced Front Overlay Touch Monitor Replacement | In Stock |
| HG2G-5ST22VF-S | IDEC HG2G 5.7in Enhanced Protective Film Touch Membrane Repair | Available Now |
| HG2G-5ST22VF-W | IDEC HG2G 5.7in Enhanced Touch Screen Tablet Front Overlay Replacement | In Stock |
| HG2G-5TN22TF-B | IDEC HG2G 5.7in Enhanced Front Overlay Touch Screen Panel Repair | Available Now |
| HG2G-5TN22TF-S | IDEC HG2G 5.7in Enhanced Touch Screen Tablet Protective Film Replacement | In Stock |
| IDEC HMI | Description | Inventory status |
IDEC HG2G 5.7in Enhanced Manuals PDF Download:
FAQ:
Question: How to adjust HG2G-5TT22TF-W Touchscreen Glass Front Overlay?
Answer:
Question: What should I pay attention to during operation?
Answer: During operation, the screen becomes blank when the backlight is burnt out; however, the touch panel of HG2G-5TT22TF-W remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.
Common misspellings:
HGG-5TT22TF-W
HG2G-5TT2TF-W
HG2GG-5TT22TF-W
HG2G-5TT22TF--W
HG2G-5TT22T-FW
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
