IDEC HG2G-5ST22TF-B HMI Panel Glass Overlay Film Repair

Order each part separately is available

Operating environment

For designed performance and safety of the touchscreen, do not install the HG2G-5ST22TF-B Touch Panel Front Overlay in the following environments:

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. In direct sunlight.
5. Where strong ultraviolet rays exist.
6. Where corrosive or combustible gasses exist.
7. Where the HG2G-5ST22TF-B Protective Film Touch Screen is subjected to shocks or vibrations.
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors)exists in the vicinity.

Ambient temperature for HG2G-5ST22TF-B HMI Touch Glass Overlay Film

1. Allow sufficient space for ventilation, and install the equipment away from heat sources.
2. Allow at least 100mm between the Touch and walls or other equipment.
3. Do not install the HG2G-5ST22TF-B Front Overlay Touch Digitizer where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the Touch in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.
4. The HG2G-5ST22TF-B Touch Screen Tablet Protective Film is designed to install on a vertical plane so that natural air-cooling is provided.
5. If you install it using any other orientation, use forced-air cooling, or lower the ambient operating temperature.