Proface LM4301TADAC PFXLM4301TADAC Film Touchscreen

Order each part separately is available

VICPAS supply Pro-face LT4000M Series LM4301TADAC PFXLM4301TADAC Protective Film and Touch Screen Panel with 365 days warranty and support Urgent Worldwide Shipping. 5.7" Operator Interface Plus Control LM4301TADAC PFXLM4301TADAC Touch Panel Front Overlay LT4000M Features:
• 5.7-inch (QVGA 320x240) Stand Alone Graphic Controller
• Ladder logic for simple machine control
• Built-in 16 discrete inputs, 16 outputs and up to 3 EXM modules
• All-in-one operator interface plus control solution reduces wiring, system cost, maintenance cost and space.
• Ethernet port for data management
• Serial port to communicate to temperature controllers.

Be aware of the following items when building the LM4301TADAC PFXLM4301TADAC Front Overlay Touch Membrane LT into an end-use product:
• The LT unit's rear face is not approved as an enclosure. When building the LT unit into an end-use product, be sure to use an enclosure that satisfies standards as the end-use product's overall enclosure.
• The LM4301TADAC PFXLM4301TADAC Touchscreen Panel Protective Film LT unit must be used indoors only.
• Install and operate the LM4301TADAC PFXLM4301TADAC Touch Panel Overlay LT with its front panel facing outwards.
• If the LT is mounted so as to cool itself naturally, be sure to install it in a vertical panel. Also, it's recommended that the LT should be mounted at least 100 mm away from any other adjacent structures or machine parts. The temperature must be checked on the final product in which the LT is installed.
• For use on a flat surface of a Type 4X (Indoor Use Only) and/or Type 13 Enclosure.