Quick Service for Full HMI Parts Replacement
Home / All / Exor UniOP / UniOP Exor HMI /

UniOP ETT-VGA-0045 HMI Touch Screen Front Overlay

UniOP ETT-VGA-0045 HMI Touch Screen Front Overlay

UniOP ETT-VGA-0045 HMI Touch Screen Front Overlay
UniOP ETT-VGA-0045 HMI Touch Screen Front OverlayUniOP ETT-VGA-0045 HMI Touch Screen Front OverlayUniOP ETT-VGA-0045 HMI Touch Screen Front Overlay
CategoriesUniOP Exor HMI
BrandVICPAS
ModelETT-VGA-0045
BrandUniOP
Warranty365 Days
Product LineUniOP ETT-VGA series
SupplyETT-VGA-0045 Protective Film Touch Screen Repair
ModelETT-VGA-0045
Size10.4 inch
FOB portGuangzhou, Shenzhen, Hongkong
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Update TimeNov 22,2024
Detail Information

UniOP ETT-VGA series HMI ETT-VGA-0045 Touch Screen Panel Front Overlay Repair


UniOP series HMI ETT-VGA-0045 Touchscreen Front Overlay Repair Kit

ETT-VGA-0045 Touch Screen Protective Film IHM Highlights
 30 Line x 80 Character Color LCD
 TFT Active Matrix or Passive Color STN
 VGA Resolution
 Analog ETT-VGA-0045 Touchscreen with 30 x 80 Matrix
 Recipe Capabilities
 UniNET Networking Capabilities
 User-definable Characters
 Links Directly to PLC Programming Port
 NEMA 4/12 Compliant Enclosure


The ECT-VGA and ETT-VGA ETT-VGA-0045 Touch Screen Glass Front Overlay HMI fulfill the need for a powerful yet cost effective operator interface system. The ETT-VGA-0045 display screens are a pixel based 16 color LCD with VGA resolution, either in TFT active matrix or passive color STN. These pixel addressable displays allow graphic capabilities with our Designer for Windows software package. Each line can contain up to 80 characters. Each page can contain up to 30 lines. Brightness control is provided to adjust the display for easy viewing under nearly any condition.





Specifications:

The table below describes the parameters of the ETT-VGA-0045 UniOP Touchscreen Overlay.

Part Number: ETT-VGA-0045
Display Type: TFT LCD
Resolution: 640x480 pixel
Backlight: CCFL
Warranty: 365 Days
Input Power: 24VDC (+10%, -15%)
Operating Temperature: 0 to 45 °C
Display Size: 10.4 in
Touch screen: Resistive
Product Line: UniOP ETT-VGA series


Related UniOP Series Part No. :

UniOP eTOP Description Inventory status
ECT-VGA-0045 Exor UniOP Touch Screen Monitor Overlay Repair In Stock
EK-41 6ZA925-7 Membrane Keyboard Keypad UniOP Replacement Available Now
EK-42 6ZA987-7 UniOP Membrane Keypad Switch Repair Part In Stock
EL-25T-0042 Exor UniOP Touch Screen Panel Protective Film In Stock
ER-25T-0045 UniOP HMI Touch Screen Front Overlay Replacement In Stock
ERT-16-0042 HMI Panel Glass Overlay Exor UniOP Repair Available Now
ERT-16-0045 Exor UniOP Front Overlay Touch Panel Glass In Stock
ERT-16-2945 UniOP Touch Screen Protective Film Repair Kit Available Now
ETT-VGA-0045 UniOP Touch Digitizer Protective Film Replacement In Stock
ETT-VGA-6545 HMI Panel Glass Overlay Replacement Repair Available Now
TECT-VGA-0345 Exor UniOP HMI Panel Glass Front Overlay In Stock
Exor UniOP HMI Description Inventory status


Exor UniOP HMI Manuals PDF Download:

  • UniOP ETT-VGA User Manual
  • UniOP User's Manual
  • UniOP Universal Operator Panels Installation Guide
  • UniOP Touch & Controls PDF
  • UniOP Manual
  • UniOP Installation Guide

  • FAQ:

    Question: How to cleaning ETT-VGA-0045 Touch Panel Glass Overlay IHM faceplates?

    Answer: The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.


    Question: What is Exor UniOP ETT-VGA-0045 Touchscreen Calibration?

    Answer:

  • Standard calibration:
  • 1. Recall Configuration Mode
  • 2. Touch the CLEAR key on the ETT-VGA-0045 screen until a small round symbol will appear on the top right corner of the screen
  • 3. touch and hold the symbol until it will move to the low left corner of the ETT-VGA-0045 screen
  • 4. touch and hold the symbol until the indication to touch the ← key will be displayed on the screen
  • 5. touch and hold the key ← until the indication to touch the ↓ key will be displayed on the screen
  • 6. touch and hold the key ↓ until the indication to touch the Enter key will be displayed on the screen
  • 7. touch and hold the Enter key until the panel will switch to Operation Mode (if a valid project is loaded in the memory)
  • Emergency calibration.
  • The Emergency calibration procedure should be used in all cases when it would result not possible to go to calibration using the standard procedure.
  • 1. Switch of the unit
  • 2. turn on the unit
  • 3. tap in the middle of the touchscreen with a frequency of about one second until the operator panel will enter the Calibration Mode
  • 4. perform the standard calibration procedure.

  • Common misspellings: 

    ETT-VGA-004
    ET-VGA-0045
    ETT-VGA-0405
    ETT-VGA-OO45
    ETT--VGA-0045
    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web