John Deere G5 Plus Universal Touch Panel LCD Screen Repair
Supply John Deere G5 Plus Universal Touchscreen Panel LCD Display for Repair Replacement
VICPAS supply touch screen panel and LCD display for John Deere G5 Plus Universal repair replacement, all of them are brand new with 365 days VICPAS warranty.
G5Plus Universal Display
Our largest display ever – 12.8-inch touchscreen with 1080p HD resolution
3x faster processor than previous models, for quicker cold boot times
Permanent AutoTrac™ and Section Control license comes standard
AutoTrac™ RowSense™ permanent license available
Also available with optional 1- or 3-year G5 Advanced license to add even more precision and automation capabilities
Features
Get started easier with John Deere Precision Ag and the G5Plus Universal Display
Take advantage of the G5Plus Universal Display, designed for efficiency
Reduce the risk of data loss by wirelessly sending and receiving data
Enable use of third-party equipment RS232 compatibility
Update precision agriculture component with over-the-air controller reprogramming
Specifications:
The table below describes the parameters/Specifications of the G5 Plus Universal John Deere Touchscreen Panel Glass LCD Display.
| Part Number: | G5 Plus Universal |
| Product Line: | John Deere |
| Screen diagonal | 12.8'' |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Operating Temp. Range: | -20° to 70° C (-4° to 158° F) |
| Storage Temp. Range: | -40° to 85° C (-40° to 185° F) |
| Input Type: | Touchscreen |
| Format | Windows FAT or FAT32. |
| Connectivity | USB 2.0 |
Related John Deere Monitor Series Part No. :
| John Deere Monitor | Description | Inventory status |
| G5 CommandCenter™ John Deere | John Deere G5 CommandCenter™ Touch Screen Glass | In Stock |
| G5 Plus Universal John Deere | John Deere G5 Plus Universal Touch Screen Panel Repair | Available Now |
| G5 Universal John Deere | John Deere G5 Universal Touch Panel Repair | In Stock |
| G5Plus CommandCenter™ John Deere | John Deere G5Plus CommandCenter™ HMI Touch Glass | Available Now |
| JOHN DEERE-4240 MIDSPEC DISPLAY PFA11378 | John Deere Touch Screen Panel LCD Display Repair | In Stock |
| PH41206431 | John Deere HMI LCD Screen Touch Membrane Replacement | In Stock |
| PH41216083 Rev.A P1B22-1117-5309 | John Deere LCD Display Screen Touch Glass Replacement | In Stock |
| PH41216083 REV.A P2163-0207-01468 | John Deere Touch Digitizer Glass LCD Display Panel | Available Now |
| PH41217524 - Rev.B P3932-0911-0219 | John Deere LCD Display Touch Digitizer Glass Replacement | Available Now |
| PH41225728 PH60227251 LQ070Y3LG02 | John Deere LCD Screen Touch Screen Monitor Repair | In Stock |
| PH41230101 Rev.B | John Deere MMI Touch Screen LCD Display Screen Replacement | In Stock |
| PH41231525 Rev.B P7459-0407-0672 | John Deere HMI Touch Screen LCD Display Panel | In Stock |
| PH90227224 | John Deere LCD Display Touch Screen Panel Repair | In Stock |
| John Deere Display | Description | Inventory status |
John Deere G5 Plus Universal Manual Brochure PDF Download:
FAQ:
Question: How to save The G5 Plus Universal John Deere setting and data?
Answer: Documentation data is saved continuously to permanent memory as it is recorded. Guidance lines are saved when the field setting is changed. Map data and some settings are saved only when the display is powered down or a data backup is performed.
Option 1. Turn the vehicle key switch to shut down the vehicle and wait for the Status LED to turn black.
Option 2. Insert a USB and Backup data.
Answer: The display will turn on and off with the vehicle key switch.
Turn ON the display
1. Turn the vehicle key switch directly to the Run position.
IMPORTANT: Do NOT allow the display to boot up with the key in Accessory Mode and then crank the engine.
NOTE: Implement controllers may take several minutes to load (if connected).
Turn OFF the display
1. Turn the vehicle key switch to shut down the vehicle and wait for the display to save settings.
IMPORTANT: Never pull the power plug without turning off the vehicle key switch. Data loss could occur.
NOTE: The display requires a constant power source to save data and settings to permanent memory after the key is switched off. The Status LED is amber while the display saves data and settings.
Putting the Display in Standby
Use Standby mode only when the display is not being used for any operations. Standby mode will dim the display, mute tracking tones, suppress GPS alerts, and signal some implements to go into Standby mode.
Question: How to use Screen Protector in John Deere G5 Plus Universal?
Answer: The use of a screen protector is recommended to prevent wear to the touchscreen surface. Screen protector kits, made specifically for G5 Plus Universal John Deere displays, can be purchased through your local John Deere dealer.
Screen protector has been preinstalled on the touch panel of your display. Removing the protector reduces the sunlight readability of the display. Please see the instructions for replacement when necessary.
Question: What is the John Deere G5 Plus Universal touchscreen keypad price?
Answer: Submit a fast quote, send VICPAS an email for best price.
Common Other Names
john deere g5 plus universal display
g5 plus universal display
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
