PH41216083 Rev.A P1B22-1117-5309 Touch Panel LCD Display Panel
Supply John Deere PH41216083 Rev.A P1B22-1117-5309 Touchscreen Panel LCD Display for Repair
Order each part separately is available
VICPAS supply touch screen panel and LCD display for John Deere PH41216083 Rev.A P1B22-1117-5309 touchscreen repair replacement, all of them are brand new with 365 days VICPAS warranty.
PH41216083 Rev.A P1B22-1117-5309 Display requires one of any three - Reverse, Neutral, or Curves/Circles signal from the SSU to allow AutoTrac to activate. SSU Software = All listed software versions are THE LATEST PRODUCTION versions to operate the GS2 system.
On John Deere PH41216083 Rev.A P1B22-1117-5309 screen coverage maps serve as a visual reference to the operator to ensure complete field coverage. This is especially important in applications where coverage is not easily seen by looking at the field, such as spraying and spreading operations or planting or notill seeding. Only one Coverage map may be stored per field and only one map may be stored when no field is selected. Coverage maps are stored in the internal memory of the display until they are cleared by the operator
Specifications:
The table below describes the parameters/Specifications of the John Deere PH41216083 Rev.A P1B22-1117-5309 Monitor Touchscreen Panel Glass LCD Display.
| Part Number : | PH41216083 Rev.A P1B22-1117-5309 |
| Product Line: | John Deere |
| Screen diagonal | 10.4'' |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Patient type: | Adult, paediatric |
| Inspiration time: | 0.2 to 10 s |
| Input Type: | Touchscreen |
| Power consumption | Typically approx. 125 W |
| Digital output | RS 232 C interface |
FAQ:
Question: How to get started John Deere PH41216083 Rev.A P1B22-1117-5309 touchscreen
Answer: The PH41216083 Rev.A P1B22-1117-5309 display is primarily used as an operator interface for guidance and documentation applications.
The primary navigational point of the display is the touchscreen which allows the operator to input information by touching the screen. The 2600 can also use the display control which allows use of input buttons andthumb wheel.
When connected to a GPS receiver, the system allows the operator to drive a vehicle with the aid of GPS. When combined with an optional AutoTrac activation, and vehicle steering kit, the system can automatically guide the machine though the field.
Documentation can be used to record data tied to GPS coordinates. On some machines, rates, yield, implementation, or other information is recorded from the vehicle CANBus. The displays can also be connected to certain third-party control units to record rate information. This data is collected on the compact flash card and can be unloaded into desktop software to produce maps and reports of field activities.
Question:How to use Screen Protector in John Deere PH41216083 Rev.A P1B22-1117-5309 touch panel?
Answer: The use of a screen protector is recommended to prevent wear to the touchscreen surface. Screen protector kits ,made specifically for GS2 displays, can be purchased through your local John Deere dealer.
Screen protector has been preinstalled on the touch panel of your display. Removing the protector reduces the sunlight readability of the display. Please seethe instructions for replacement when necessary.
Question: What is the John Deere PH41216083 Rev.A P1B22-1117-5309 touchscreen LCD Display Panel price?
Answer: Submit a fast quote, send VICPAS an email for best price.
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
