MMI7070-P MMI7070PE MMI-7070-P-E MMI7070P2 Overlay LCD Display Case Touchpad

Order each part separately is available

If any of the following issues arise, have the equipment inspected by qualified service personnel:

1. The power cord or plug is damaged.
2. Liquid has entered the HMI Weinview MMI-7000 Series MMI7070-P MMI7070PE MMI-7070-P-E MMI7070P2 Screws, Power Supply Connector, Mounting Brackets, Front Overlay, Front Case, Touch Screen Glass, LCD Display Screen and Back Cover.
3. The equipment has been exposed to moisture.
4. The device is malfunctioning or not operating as specified in the user manual.
5. The MMI7070-P MMI7070PE MMI-7070-P-E MMI7070P2 Touch Digitizer Glass, Gasket, Power Supply Connector, Front Overlay, Mounting Brackets, Screws, LCD Panel and Housing has been dropped and is damaged.
6. There are visible signs of breakage on the equipment.

Additionally, if the equipment will remain unused for an extended period, disconnect it from the power source and check if the Weinview HMI MMI7070-P MMI7070PE MMI-7070-P-E MMI7070P2 Mounting Brackets, Plastic Shell, Power Supply Connector, Touch Panel, LCD Screen, Screws, Gasket and Protective Film is functional. Never pour liquid into any openings, as this can cause fire, electrical shock, or damage to the Weintek Weinview MMI7070-P MMI7070PE MMI-7070-P-E MMI7070P2 LCD Display Screen, Front Overlay, Power Supply Connector, Screws, Front Case, Gasket, Back Cover, Mounting Brackets and Touch Screen Monitor. For your safety, never attempt to open the equipment yourself. Only qualified service personnel should open the device for maintenance.