MT505T MT505TV5 Touch Membrane Front Overlay Replacement

Order each part separately is available

Description

The Weinview HMI MT500 Series MT505T MT505TV5 Touch Screen Panel Front Overlay is designed for use in a factory environment. It is designed to operate from 32 to 113 °F (0 to 45 °C) temperatures, as found in most industrial environments. MT505T MT505TV5 Protective Film Touch Membrane may not be suitable for use in certain outdoor applications. Please consult the factory for advised usage in outdoor applications. The MT500 Series front bezel is NEMA 4 rated. When installed properly in a NEMA 4 panel, the NEMA 4 rating of the panel will not be compromised. This means that fluids will not enter the panel during wash downs.

Avoid installing MT505T MT505TV5 Front Overlay HMI Touch Glass in environments where severe mechanical vibration or shocks are present. The MT500 Series has been tested to conform to European CE requirements. This means that the circuitry is designed to resist the effects of electrical noise. This does not guarantee noise immunity in severe cases. Proper wire routing and grounding will insure proper operation.

Care should be taken when locating MT505T MT505TV5 Touch Digitizer Glass Protective Film behind the unit to ensure that AC power wiring, PLC output modules, contactors, starters and relays, and any other source of electrical interference are located away from the back of the unit. Particular note should be taken to the position of variable speed drives and switching power supplies. Their input and load cables should be screened to a central star earth point.