IPC 477E PRO 6AV7251-5GB05-0FA0 Touch Screen Monitor Repair
IPC 477E PRO 6AV7251-5GB05-0FA0 Touch Screen Monitor Repair
Categories | SIMATIC IPC 477 |
---|---|
Brand | VICPAS |
Model | 6AV7251-5GB05-0FA0 |
Touch screen panel type | Capacitive |
Size | 19 inch |
Brand | Siemens |
Warranty | 365 Days |
Product Number | 6AV7 251-5GB05-0FA0 |
Product Line | SIMATIC IPC477E PRO Series |
Shipping | 2-4 Days |
Supply Part | Touch Digitizer Glass |
FOB port | Guangzhou, Shenzhen, Hongkong |
Terms of Payment | Western Union, T/T, PayPal, Credit Card |
Update Time | Nov 9,2024 |
SIMATIC IPC 477E PRO 6AV7251-5GB05-0FA0 Touch Screen Glass Replacement Repair
Operating a capacitive multi-touch screen device
An inadequate earth connection or the lack of one may cause malfunction of the Siemens IPC 477E PRO 6AV7 251-5GB05-0FA0 Touch Screen. Functions may not work properly. This can result in personal injury or property damage. Always connect the device to an earth conductor. The earth conductor from the device must be connected directly to earth with low impedance (short connection, minimum cross-section 2.5 mm2). Incorrect operation of devices with IPC477E PRO 6AV7251-5GB05-0FA0 Touch Membrane can occur. This can result in personal injury or property damage. Take the following precautions: Configure the plant so that safety-related functions are not operated with the Simatic 6AV72515GB050FA0 Touch Panel. Switch off the device for cleaning and maintenance.
Note when operating the 6AV7 251-5GB05-0FA0 Touch Digitizer Glass:
● Surface contact with a diameter of about 5 to 20 mm is required for an operator action to be detected.
● An operation with gloves with a material thickness less than 2 mm is detected in most cases. However, check the usefulness of the gloves you are using.
● To avoid incorrect operation, certain inputs are ignored and blocked from further entry:
1. Simultaneous operation with more than 5 fingers.
2. Surface contact with a diameter of more than 3 cm, for example, resting the palm of the hand on the 6AV72515GB050FA0 HMI Touch Glass.
3. As soon as the touch screen is no longer touched, input is possible again.
Specifications:
The table below describes the parameters of the Siemens IPC477E PRO 6AV72515GB050FA0 Touch Screen.
Relative Humidity: | 90% |
Product Line: | IPC 477E PRO |
Environment: | Free From Corrosive Gases |
Warranty: | 12 Months |
Brand: | Siemens |
Part Number: | 6AV7251-5GB05-0FA0 |
Front Panel: | IP65 |
Touch Size: | 19'' |
Resolution: | 1366 x 768 Pixels |
Max Installation Angle: | ±45 ° |
Related SIMATIC IPC477 Series HMI Part No. :
SIEMENS IPC477 HMI | Description | Inventory status |
6AV7251-3EA07-0FA0 | SIMATIC IPC 477E PRO Series Touch Screen Monitor | In Stock |
6AV7251-3GA37-0FS0 | SIEMENS IPC477E PRO Series MMI Touch Screen Repair | Available Now |
6AV7251-5FB07-0DA0 | SIMATIC IPC 477E PRO Series Touch Digitizer Replacement | In Stock |
6AV7251-5FC35-0GA0 | SIMATIC IPC477E PRO Series Touch Screen Replacement | Available Now |
6AV7251-5FG34-0FA0 | SIMATIC IPC 477D PRO Touch Panel Replacement | In Stock |
6AV7251-5GB05-0FA0 | SIEMENS IPC477D PRO Touch Digitizer Glass Repair | Available Now |
6AV7251-7GC08-0GA0 | SIMATIC IPC 477D PRO Touch Screen Glass Repair | In Stock |
6AV7255-6KA00-0LF0 | SIMATIC IPC477D PRO Touch Screen Panel Replacement | Available Now |
6AV7255-6KA00-0LF1 | SIEMENS IPC 477D PRO Touch Membrane Repair Replacement | In Stock |
SIMATIC IPC477 HMI | Description | Inventory status |
SIMATIC IPC477 Series Manuals PDF Download:
FAQ:
Question: How to protect my Siemens 6AV72515GB050FA0 Touch Screen Panel from Burn-in effect?
Answer:
• Switch on the screensaver. The backlight brightness is reduced while the screensaver is active.
• You should also reduce the backlighting.
• Observe the backlighting operating time.
Question: What kind of ambient conditions should I keep and use Simatic IPC 477E PRO 6AV7251-5GB05-0FA0 Touch Membrane?
Answer:
1. Against dust, moisture and heat.
2. Do not expose to direct sunlight or to other strong sources of light.
3. Without additional safety measures, such as a supply of clean air, 6AV7 251-5GB05-0FA0 Touchscreen may not be used in locations with harsh operating conditions caused by acidic vapors or gases.
4. Always use suitable cleaning agents.
Common misspellings:
AV7251-5GB05-0FA06AV7251-GB055-0FA0
6AV7251-5GB05-0F0A
6AV7215-5GB05-0FA0
6AV7251-5GB005-FA0
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content