MTP2200 Unified Comfort 6AV2128-3XB70-0AX0 Touch Panel

Order each part separately is available

Warnings

The device constitutes open equipment on the back side

The device constitutes open equipment on the back side. This means that you must integrate the device in an enclosure or cabinet where the device is operated via its front side with Siemens MTP2200 6AV2128-3XB70-0AX0 Touchscreen. The enclosure or the cabinet must provide protection for Simatic 6AV2 128-3XB70-0AX0 Touch Screen Glass against electric shock and the spread of fire. The enclosure or the cabinet must meet the requirements for mechanical strength and the degree of protection for MTP2200 6AV21283XB700AX0 Touch Digitizer Glass. Access to the enclosure or cabinet in which the device is installed should only be possible by means of a key or tool and only for qualified personnel.

Electrocution risk when control cabinet is open

When you open the control cabinet, there may be a dangerous voltage at certain areas or Siemens 6AV21283XB700AX0 Touch Screen Panel. Touching these areas or components can cause electrocution. Disconnect the cabinet from the mains before opening it. Do not plug in or pull out plant components during operation.

The device must only be used in machines which comply with the Machinery Directive

The Machinery Directive specifies precautions to be taken when commissioning and operating machinery within the European Economic Area. Failure to follow these precautions is a breach of the Machinery Directive. Such failure may also cause personal injury and damage 6AV21283XB700AX0 Touch Membrane. The machine in which the HMI device is to be operated must conform to Directive 2006/42/EC.