Quick Service for Full HMI Parts Replacement
Home / All / for Siemens / SIMATIC ITC Series /

ITC1500 V3 6AV6646-1BA16-0NA1 Touchpad Repair

ITC1500 V3 6AV6646-1BA16-0NA1 Touchpad Repair

ITC1500 V3 6AV6646-1BA16-0NA1 Touchpad Repair
ITC1500 V3 6AV6646-1BA16-0NA1 Touchpad RepairITC1500 V3 6AV6646-1BA16-0NA1 Touchpad RepairITC1500 V3 6AV6646-1BA16-0NA1 Touchpad RepairITC1500 V3 6AV6646-1BA16-0NA1 Touchpad RepairITC1500 V3 6AV6646-1BA16-0NA1 Touchpad Repair
CategoriesSIMATIC ITC Series
BrandVICPAS
Model6AV6646-1BA16-0NA1
BrandSiemens
Size15 inch
Warranty365 Days
Product LineSIMATIC ITC1500 V3
SupplyTouch Screen Glass
Shipping2-4 workdays
Part Number6AV6646-1BA16-0NA1
Terms of PaymentWestern Union, T/T, PayPal, Credit Card
Download
Update TimeDec 23,2024
Detail Information

SIMATIC ITC1500 V3 6AV6646-1BA16-0NA1 Touch Screen Display Replacement


SIMATIC ITC1500 V3 6AV6646-1BA16-0NA1 Touch Screen Panel Repair Replacement

Functions of the 6AV6 646-1BA16-0NA1 capacitive multi-touch screen

General functions
● Detection of up to 5 finger touches at a time.
● Recognition of the gestures supported by the operating system and the runtime software.
● You do not need to calibrate the 6AV6646-1BA16-0NA1 Touch Panel HMI capacitive multi-touch screen.

Security functions in an industrial environment
The 6AV66461BA160NA1 capacitive multi-touch screen is locked for security reasons when the following disturbances occur:
● There is a conductive liquid on the SIMATIC ITC1500 V3 6AV6646-1BA16-0NA1 touch screen with ground contact via the enclosure or the operator, for example.
● An electromagnetic disturbance that exceeds the specification in the technical data of the device exerts an influence.
Once the interference is over, the 6AV66461BA160NA1 Touch Screen Terminal capacitive multi-touch screen is no longer locked.


VICPAS supply SIMATIC ITC1500 V3 6AV6646-1BA16-0NA1 Touch Panel with 365 days warranty and support Urgent Worldwide Shipping.




Specifications:

The table below describes the parameters of the SIMATIC SIMATIC ITC1500 V3 6AV6 646-1BA16-0NA1 Touch Panel HMI Parts.

Ambient Humidity: 10 to 90 % RH
Display Type: TFT Display
Brand: Siemens
Warranty: 365 Days
Display Colors: Up to 16.7 million
Part Number: 6AV6646-1BA16-0NA1
Product Line: SIMATIC ITC1500 V3
Backlight: LED
Storage Temperature: -20°C (-4°F) to 60°C (140°F)
Touch Type: Capacitive


Related SIMATIC HMI ITC1500 Series HMI Part No. :

SIMATIC ITC1500 HMI Description Inventory status
6AV6646-1BA15-0AA0 SIEMENS HMI ITC1500 V3 Series Touch Membrane Repair In Stock
6AV6646-1BA15-0AA1 SIMATIC HMI ITC1500 V3 Series Touch Glass Replacement In Stock
6AV6646-1BA15-0NA0 SIEMENS HMI ITC1500 V3 Series Touch Digitizer Glass Repair Available Now
6AV6646-1BA15-0NA1 SIMATIC HMI ITC1500 V3 Series MMI Panel Screen Replacement Available Now
6AV6646-1BA16-0AA1 SIMATIC HMI ITC1500 V3 Series Touch Screen Monitor Repair In Stock
6AV6646-1BA16-0NA1 SIMATIC HMI ITC1500 V3 Series MMI Touch Screen Replacement In Stock
6AV6646-1BB15-0AA0 SIMATIC HMI ITC1500 V3 PRO Series HMI Touch Screen Panel Repair Available Now
6AV6646-1BB15-0NA0 SIMATIC HMI ITC1500 V3 PRO Series Touch Screen Display Repair In Stock
6AV6646-1BC15-0AA0 SIMATIC HMI ITC1500 V3 PRO Series Touch Screen Glass Replacement Available Now
6AV6646-1BC15-0NA0 SIMATIC HMI ITC1500 V3 PRO Series Touch Screen Tablet Repair In Stock
SIMATIC ITC1500 HMI Description Inventory status


SIMATIC ITC1500 V3 HMI Manuals PDF Download:

  • hmi_itc_v3_operating_instructions_enUS_en-US
  • hmi_itc_operating_instructions_en-US_en-US

  • FAQ:

    Question: What is the display size of SIMATIC ITC1500 V3 6AV6646-1BA16-0NA1 Touch Digitizer Glass?

    Answer: The 6AV66461BA160NA1 Protective Film HMI Panel Glass is 15 inch.


    Question: How to remove the 6AV6 646-1BA16-0NA1 device?

    Answer: Proceed as follows:
    1. If a project is running on the HMI device, close the project with the HMI device configured for this purpose. Wait until the Control Panel is displayed.
    2. Switch off power to the 6AV6646-1BA16-0NA1 Front Overlay Touch Screen Monitor HMI device.
    3. When you use the HMI device in a hazardous area, make sure that one of the two following requirements is met: The area is no longer hazardous or the device and its plugin connections are de-energized.
    4. Remove all cable ties on the HMI device used for strain relief.
    5. Remove all plug-in connectors and the equipotential bonding cable from the HMI device.
    6. Secure the HMI device so that it cannot fall out of the mounting cutout.
    7. Loosen the screws of the mounting clips and remove all mounting clips.
    8. Take the 6AV6 646-1BA16-0NA1 Touch Digitizer Glass Protective Film HMI device out of the mounting cutout.

    Common misspellings: 

    6AV6646-1BA1-0NA1
    6AV6646-1BA16-0NA11
    6AV66416-1BA16-0NA1
    6AV46461BA16-0NA1
    6AV6646-1BA16--0NA1
    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web