IDEC HG2A-SS22BF Touch Screen Monitor Repair
IDEC HG2A-SS22BF Touch Screen Monitor Repair
Categories | HG2A, HG2S, FT1A 3.8-inch PLC+HMI |
---|---|
Brand | VICPAS |
Model | HG2A-SS22BF |
Warranty | 365 Days |
Shipping | 2-4 workdays |
Brand | IDEC |
Supply Parts | Touch Screen Display |
Size | 5.7 inches |
FOB port | Guangzhou, Shenzhen, Hongkong |
Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union |
Update Time | Nov 23,2024 |
IDEC HG2A Series HG2A-SS22BF HMI Panel Screen Replacement
Maintenance and Inspection of HG2A-SS22BF Touch Screen Display
Maintain and inspect the IDEC HG2A-SS22BF Touch Digitizer Glass periodically to ensure the best performance. Do not disassemble, repair, or modify the HG2A-SS22BF MMI Touch Glass during inspection. Wipe any stain off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent. Do not use solvents such as thinner, ammonia, strong acid, and strong alkaline. Check the terminals and connectors to make sure of no loose screws, incomplete insertion or disconnected lines. Make sure that all mounting clips and screws are tightened sufficiently.If the mounting clips are loose, tighten the screw to the recommended tightening torque.
Adjusting the HG2A-SS22BF Touch Panel
A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Readjust the touch panel when there is a gap in the operation of the touch panel.
Panel Cut-out Dimensions of HG2A-SS22BF Touchscreen
Place the IDEC HG2A in a panel cut-out and fasten with the attached mounting clips. Do not tighten excessively, otherwise the HG2A-SS22BF Touch Membrane may warp and cause wrinkle on the display, or impair the waterproof characteristics.
Note for operation
The screen becomes blank when the backlight is burnt out; however, the HG2A-SS22BF Touch Digitizer Glass remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Note that this erroneous operation may result in damage.
Specifications:
The table below describes the parameters of the IDEC HG2A-SS22BF Touch Screen Monitor HMI.
Corrosion Immunity: | Free from corrosive gases |
Operating Humidity: | 20 to 85% RH |
Product Line: | HG2A Series |
Storage Temperature: | -25 ~ 60°C |
Screen Size: | 5.7'' |
Brand: | IDEC |
Model Number: | HG2A-SS22BF |
Warranty: | 1-Year Warranty |
Mounting: | Panel Mounting |
Degree of Protection: | IP65 |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG2A-SB22BF | IDEC HG2A Series Touch Screen Panel Replacement | In Stock |
HG2A-SB22CF | IDEC HG2A Series Touch Digitizer Glass Repair | Available Now |
HG2A-SB22CT | IDEC HG2A Series Touch Membrane Replacement | In Stock |
HG2A-SB22JF | IDEC HG2A Series Touch Screen Glass Repair | Available Now |
HG2A-SB22VF | IDEC HG2A Series Touch Screen Display Replacement | In Stock |
HG2A-SS22CF | IDEC HG2A Series Touchscreen Monitor Replacement | In Stock |
HG2A-SS22CT | IDEC HG2A Series Touch Screen Film Repair | Available Now |
HG2A-SS22JF | IDEC HG2A Series Touch Screen Tablet Replacement | In Stock |
HG2A-SS22VF | IDEC HG2A Series HMI Touch Glass Repair | Available Now |
IDEC HMI | Description | Inventory status |
IDEC HG2A Series Manuals PDF Download:
FAQ:
Question: How do I calibrate the touch screen on the HG2A-SS22BF HMI?
Answer: To calibrate the touch panel of HG2A-SS22BF, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
Question: How to install HG2A-SS22BF Terminal?
Answer:
Common misspellings:
G2A-SS22BF
HG2A-SS22B
HG2A-SSS22BF
HG2AS-S22BF
HG2A-SS2B2F
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content