Keyence VT5-W07 Protective Film Touchscreen Repair

Order each part separately is available

Request
When using the Keyence VT5-W07 Touch Screen Protective Film VT5 series under conditions and environment indicated below, use with sufficient margin with respect to ratings and functions, adopt safety countermeasures such as fail-safe measures, and consult your sales representative.
• Use Keyence VT5-W07 Touch Digitizer Front Overlay VT5 product under conditions and environments not described in this manual.
• Use for nuclear power control, railroad facilities, aircraft facilities, vehicles, combustion units, medical equipment, amusement machines, and safety devices.
• Use Keyence VT5-W07 Protective Film HMI Touch Glass in applications where a major influence on human life or property is anticipated, and where safety in particular is required.
Before attaching extension units on the Keyence VT5-W07 Front Overlay Touch Panel VT5 product, be sure to turn the VT5 OFF. Also, make sure that screws are firmly secured before using the VT5 again.
• Remove the seal of extension connector 1 on the rear of the VT5.
• Align the Ethernet Unit with the VT5 as shown in the figure below, and gently insert the Ethernet Unit vertically into the Keyence VT5-W07 Touch Membrane Protective Film VT5 product while confirming the position of extension connector 1.
• Secure the Ethernet Unit onto the Keyence VT5-W07 Touch Panel Front Overlay VT5 product using four screws.