FPM-120-TS FPM-170-TS Protective Film Touch Glass HMI
Categories | Koyo Other Series |
---|---|
Brand | VICPAS |
Model | FPM-120-TS FPM-170-TS |
Brand | Automation Direct |
Size | 12-17 inch |
Warranty | 365 Days |
Supply | FPM-120-TS Touch Screen Protective Film |
Shipping | 2-4 workdays |
Supply | FPM-170-TS Front Overlay Touch Panel |
Terms of Payment | Western Union, T/T, PayPal, Credit Card |
Update Time | Dec 25,2024 |
Automation Direct FPM-120-TS FPM-170-TS Protective Film Touch Pad Replacement
Order each part separately is available
VICPAS supply Automation Direct FPM-120-TS FPM-170-TS Protective Film and Touch Panel with 365 days warranty and support Urgent Worldwide Shipping.
The Automation Direct FPM-120-TS FPM-170-TS Touch Membrane Front Overlay interface to the PC is RS-232, so the recommend maximum distance from the PC is 50 feet., The driver and and interface have been tested to 50 Ft. using high quality cables. High quaility cables and connectors are important, especially if field connections are made. Poor quality cables will drastically reduce the performance of the RS-232 interface. The touch driver default baud rate is 9600. The Automation Direct FPM-120-TS FPM-170-TS Front Overlay Touch Screen itself is connected to electronics [internal to the display unit] that provide the Analog to Digital conversion. When the screen is touched, the electronics convert the analog voltage to a digital value and add a "Mouse Click". This touch data is sent out from the display serial port to the PC serial port where the touch driver presents the data to the operating systems as if it were from a normal PC mouse. When the touch is released the new XY location is sent along with a "Mouse Up Click".
FPM-170-TS Touch Digitizer Glass Protective Film Display Features
The FPM-170-TS is capable of displaying 16M (24 Bit) colors in a continuous spectrum. The high-contrast LCD enhances the image with no geometric distortion.
FPM-170-TS Series directly accepts an analog 5-wire RGB with separate H/V (Horizontal / Vertical) sync. This is the standard PC video signal. The FPM-170(-TS) Series is auto synchronous, adjusting the display to the appropriate input between VGA and SXGA.
The FPM-170-TS Series is supplied with an Anti-Glare Touch Screen [TS models] or an Anti-Glare impact window on non-touchscreen models.
The FPM-170-TS Series has an integrated 115/220VAC power supply as standard on all models.
Specifications:
The table below describes the parameters of the Automation Direct FPM-120-TS FPM-170-TS Protective Film Touch Screen HMI Parts.
Ambient temperature: | 0°C (32°F) to 50°C (122°F) |
Display Resolution: | 1280 x 1024 pixels |
Model Number: | FPM-120-TS FPM-170-TS |
Touch Size: | 12"-17" |
VGA (HD-15F): | Yes |
Brand: | Automation Direct |
Display Type: | TFT Active Matrix |
Power supply: | 24 V DC |
Storage Temperature: | -20°C (-4°F) to 60°C (140°F) |
Warranty: | 365 Days |
Related Automation Direct HMI Part No. :
Automation Direct | Description | Inventory status |
FLI-150 | Automation Direct FLI Front Overlay Touch Membrane | In Stock |
FLI-150-TS | Automation Direct FLI Series Touch Glass Front Overlay Repair | In Stock |
FLI-180 | Automation Direct FLI Series Touch Digitizer Glass Overlay Repair | Available Now |
FLI-180-TS | Automation Direct FLI HMI Panel Glass Protective Film | Available Now |
FPM-120 | Automation Direct FPM Series Touch Screen Monitor Front Overlay | In Stock |
FPM-120-TS | Automation Direct FPM Series Front Overlay MMI Touch Screen Replacement | In Stock |
FPM-170 | Automation Direct FPM Series HMI Touch Screen Protective Film | Available Now |
FPM-170-TS | Automation Direct FPM Series Protective Film Touchscreen Repair | In Stock |
FPM-180 | Automation Direct FPM Series HMI Protective Film Touch Screen Glass | Available Now |
FPM-180-TS | Automation Direct FPM Series Front Overlay Touch Screen Panel Repair | In Stock |
Automation Direct | Description | Inventory status |
Automation Direct HMI Manuals PDF Download:
FAQ:
Question: FPM-120-TS FPM-170-TS Image Persistence
Solution: Image persistence occurs when a ghost of an image remains on the screen after the screen image has been changed. Unlike a CRT monitor, an LCD monitor's image persistence is not permanent. To erase an image ghost, turn the monitor off for several hours. What happens is the liquid crystals after extended periods of operation take a “set”. To avoid this condition, install a screen saver program on the computer
Question: FPM-120-TS FPM-170-TS Display image is not properly sized
Solution: Press the “Select” button to Auto Adjust the display Adjust the Vertical and Horizontal size controls via the OSD. Ensure that a supported mode is selected on the FPM-120-TS FPM-170-TS display card or system being used. Consult the display card or system manual for proper video.
Common misspellings:
FPM-120-TS FM-170-TSPM-120-TS FPM-170-TS
FPM-120-TS PFM-170-TS
FPM-120-TS FPM-1T0-TS
FPM-120--TS FPM-170-TS
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content