FLI-180 FLI-180-TS Front Overlay HMI Panel Glass Repair

Order each part separately is available

Adjusting the FLI-180 FLI-180-TS Touch Panel Front Overlay Display
The Automation Direct FLI-180 FLI-180-TS Touch Digitizer Front Overlay display has an embedded microprocessor on the converter card [the electronics that drive the LCD], and has been recently updated with a more powerful chipset. In most cases, the unit will require very little if any user intervention to operate correctly. That is, produce a sharp, stable picture. The microprocessor in the display has the capability to adjust itself to the computer to which it is attached. This auto-adjustment will take place when the unit is first installed and connected to a computer if the video input changes or the user initiates it. If the picture is not satisfactory, the first step is to allow the unit to attempt to re-adjust itself to your computer.

FLI-180 FLI-180-TS Protective Film Touch Screen interfaces have become the standard interface. They are, rugged, reliable, extremely flexible and easier than ever to implement! The universal acceptance of the Windows GUI [Graphical User Interface] along with the extensive use of a mouse interface has significantly accelerated the use of an FLI-180 FLI-180-TS Front Overlay touch interface. Basically, think of your touch screen as if it were a mouse.