Proface 3620003-02 APL3700-TFM-BLD Touch Digitizer Front Overlay Repair

Order each part separately is available

Be aware of the following items when building the 3620003-02 APL3700-TFM-BLD Front Overlay Touch Screen PL into an end-use product:
• High-Quality TFT Color LCD Display
• The 3620003-02 APL3700-TFM-BLD Touch Panel Protective Film unit's rear face is not approved as an enclosure. When building the PL unit into an end-use product, be sure to use an enclosure that satisfies standards as the end-use product's overall enclosure.
• The 3620003-02 APL3700-TFM-BLD Front Overlay Touch Digitizer Glass unit must be used indoors only.
• Install and operate the 3620003-02 APL3700-TFM-BLD Touchscreen Glass Protective Film PL with its front panel facing outwards.
• If the PL is mounted so as to cool itself naturally, be sure to install it in a vertical panel. Also, according to the installation requirements, create space around the rear face of the PL unit. The temperature must be checked on the final product in which the PL unit is installed.
• For use on a flat surface of a Type 4X (Indoor Use Only) and/or Type 12 Enclosure.
• Type 4X (Indoor Use Only) and/or 12 Enclosure, when the hatch for Front USB Port is secured by a screw. Type 1 Enclosure, when the hatch for Front USB Port is open.