Quick Service for Full HMI Parts Replacement
Home / All / Sigmatek HMI /

Sigmatek ETV 0552-K Touch Panel Protective Film Repair

Sigmatek ETV 0552-K Touch Panel Protective Film Repair

Sigmatek ETV 0552-K Touch Panel Protective Film Repair
Sigmatek ETV 0552-K Touch Panel Protective Film RepairSigmatek ETV 0552-K Touch Panel Protective Film RepairSigmatek ETV 0552-K Touch Panel Protective Film RepairSigmatek ETV 0552-K Touch Panel Protective Film RepairSigmatek ETV 0552-K Touch Panel Protective Film Repair
CategoriesSigmatek HMI
BrandVICPAS
Model12-230-0552-K Einbauterminal VARAN ETV0552-K
Touch screen tapesResistance touch screen
BrandSigmatek
Product LineETV Series Control Panel
Size5.7''
PartsTouch Screen Panel Glass Repair
Model12-230-0552-K Sigmatek ETV0552-K
Warranty365 Days
Terms of PaymentWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
Download
Update TimeDec 26,2024
Detail Information

12-230-0552-K SIGMATEK ETV0552-K Touch Screen Panel Glass Protective Film Repair

Order each part separately is available

SIGMATEK 12-230-0552-K Elnbauterminal VARAN ETV0552-K Touch Screen Panel Glass Front Overlay Repair Replacement
SIGMATEK 12-230-0552-K Elnbauterminal VARAN ETV0552-K Touch Screen Panel Glass Front Overlay Repair Replacement


The following clearance is required for the Sigmatek ETV0552-K Protective Film Touch Digitizer Glass Terminal cover: Rear side, left and right 5 cm. Above and below 10 cm. A mounting position of 60° to 120° is also required. The ETV0552-K Touchscreen Panel Front Overlay terminal must be connected to earth through the mounting on control cabinet or over the ETV0552-K Touch screen panel glass Film terminal provided. It is important to create a low-ohm earth connection, only then can error-free operation be guaranteed. The earth connection should have the maximum cross section and the largest electrical surface possible.


VICPAS supply SIGMATEK 12-230-0552-K Einbauterminal VARAN ETV0552-K touchscreen panel with protective film overlay, all of them are brand new with 365 days VICPAS warranty. The ETV0552-K Control Panel with EDGDE Technology combines control, operation and visualization in a single unit. Local as well as decentralized I/O systems can be connected over the VARAN bus and therefore not bound to a specific topology when constructing your system. The available interface connections can be programmed completely from the application.



Specifications:

The table below describes the parameters of the Sigmatek 12-230-0552-K VARAN ETV0552-K Front Overlay Touchscreen Panel.

Part Number : ETV0552-K
Product Line: Sigmatek VARAN
Screen diagonal 5.7 in
Warranty: 365 Days Warranty
Input Power 24 VDC
Display Type: TFT color
Mounting position: Vertical
Input Type: Touchscreen
Serial interface Type: RS232
Storage -20 to 70°C


Related Sigmatek Panel Part No. :

Sigmatek VARAN Description Inventory status
ETV 0501 Sigmatek Einbauterminal VARAN Touch Screen Protective Film Repair In Stock
ETV 0551 Einbauterminal VARAN Sigmatek Touch Panel Protective Film Replacement Available Now
ETV 0551-V Sigmatek Einbauterminal VARAN Touchscreen Protective Film Repair In Stock
ETV 0552-B Einbauterminal VARAN Sigmatek HMI Touch Screen Glass Protective Film Available Now
ETV 0552-K Sigmatek Einbauterminal VARAN Touch Screen Panel Front Overlay Repair In Stock
ETV 0555 Sigmatek Einbauterminal VARAN Front Overlay Touch Membrane In Stock
ETV 0811 Sigmatek Einbauterminal VARAN HMI Touch Glass Front Overlay Repair In Stock
ETV 0851 Sigmatek Einbauterminal VARAN Touch Digitizer Glass Overlay Repair Available Now
ETV 0851-I Sigmatek Einbauterminal VARAN HMI Panel Glass Protective Film Available Now
ETV 0855 Einbauterminal VARAN Touch Screen Monitor Front Overlay Replacement In Stock
ETV 085A Sigmatek Einbauterminal VARAN MMI Touch Screen Front Overlay In Stock
ETVA-0501 Sigmatek Einbauterminal VARAN HMI Touch Screen Protective Film In Stock
SIGMATEK HMI Description Inventory status

SIGMATEK ETV0552 Control Panel Manuals PDF Download:

  • Sigmatek ETV0552 Controller User Manual
  • Sigmatek ETV0552 Panel Datasheet

  • FAQ:

    Question:How to exchange the Sigmatek ETV0552-K Battery?

    Answer:
    1. Disconnect the power to the ETV.
    2. Open the locking screws on the back f the terminal with a PH-1 screwdriver:
    How to exchange the Sigmatek ETV0552-K Battery?
    3. Lift rear panel of the terminal:
    For HW version 1.x:
    How to exchange the Sigmatek ETV0552-K Battery?
    4. Using the strap, remove the battery the holder (see arrow).
    5. Insert the new battery with the correct polarity and close the terminal.
    (+ Pole toward the backside)
    From HW version 2.x:
    How to exchange the Sigmatek ETV0552-K Battery?
    4. Using the strap, remove the battery from the holder (see arrow).
    5. Place the new battery in the holder with the correct polarity (+ Pole toward the frontside) and replace the cover.

    Question:What is the price of SIGMATEK ETV0552-K Front Overlay Touch Screen Monitor?

    Answer: Submit a quote request, send us an email for our best price.

    Common misspellings: :

    ETV052-K
    ETV055-K
    ETV0552K-
    EVT0552-K
    ETVO552-K
    ETV055Z-K
    ETV0552-KK
    ETV00552-K


    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web