HMIST6400 HMISTW6400 HMISTM6400 Overlay Touch Membrane
HMIST6400 HMISTW6400 HMISTM6400 Overlay Touch Membrane
Schneider Harmony ST6 & STW6 HMI HMIST6400 HMISTW6400 HMISTM6400 Touch Screen Monitor Protective Film Repair Part
Order each part separately is available
Even if the Schneider Harmony ST6 & STW6 HMIST6400 HMISTW6400 HMISTM6400 Touch screen panel glass protective film graphic screen operator dialogue terminals installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this HMIST6400 HMISTW6400 HMISTM6400 Front overlay touchscreen panel product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
VICPAS supply HMIST6400 HMISTW6400 HMISTM6400 Harmony ST6 & STW6 Schneider Touch screen panel glass and protective film with 365 Days warranty and support Urgent Worldwide Shipping. The HMIST6400 HMISTW6400 HMISTM6400 touch panel does not support two-point touch (multiple point touch). If you touch multiple points on the HMIST6400 HMISTW6400 HMISTM6400 touch panel, it will operate as if you touched the center-point of the multiple touches. For example, if you touch two or more points on the HMIST6400 HMISTW6400 HMISTM6400 touch panel and at the center of the touches is a switch for a drive system, even though you did not directly touch that switch, it may function as if you did.
Specifications:
The table below describes the parameters of the HMIST6400 HMISTW6400 HMISTM6400 Harmony ST6 & STW6 Front Overlay Touch Screen.
| Part Number: | HMIST/STW/STM6400 |
| Display device: | Colour TFT LCD |
| Screen diagonal: | 7 inch |
| Warranty: | 365 Days |
| Product Line: | Harmony ST6&STW6 |
| Rated Voltage: | 24 V DC (+/- 20 %) |
| Operating Temp.: | 0…50 °C |
| Storage Temp.: | -20…60 °C |
| Operating altitude: | 2000 m |
| Display colour: | 16 million colours |
Related Schneider Harmony ST6 & STW6 Series Part No. :
| Harmony ST6 & STW6 | Description | Inventory status |
| HMIST6200 | Schneider Harmony ST6 Touch Screen Protective Film Repair | In Stock |
| HMIST6400 | Harmony ST6 Schneider Touch Panel Protective Film Replacement | Available Now |
| HMIST6500 | Schneider Harmony ST6 Touchscreen Protective Film Repair | In Stock |
| HMIST6600 | Harmony ST6 Schneider HMI Touch Screen Glass Protective Film | Available Now |
| HMIST6700 | Schneider Harmony ST6 Touch Screen Panel Front Overlay Repair | In Stock |
| HMISTW6200 | Schneider Harmony STW6 Front Overlay Touch Membrane | In Stock |
| HMISTM6200 | Schneider Harmony STW6 HMI Touch Glass Front Overlay Repair | In Stock |
| HMISTW6400 | Schneider Harmony STW6 Touch Digitizer Glass Overlay Repair | Available Now |
| HMISTM6400 | Schneider Harmony STW6 HMI Panel Glass Protective Film | Available Now |
| HMISTW6500 | Harmony STW6 Touch Screen Monitor Front Overlay Replacement | In Stock |
| HMISTW6600 | Schneider Harmony STW6 MMI Touch Screen Front Overlay | In Stock |
| HMISTW6700 | Schneider Harmony STW6 HMI Touch Screen Protective Film | In Stock |
| Harmony ST6 & STW6 | Description | Inventory status |
Schneider Harmony ST6&STW6 HMI Manuals PDF Download:
FAQ:
Question: How to replace the HMIST6400 HMISTW6400 HMISTM6400 Front Overlay Touch screen glass terminal Primary Battery?
Answer:
1 Disconnect the power supply from this product.
2 Touch the housing or ground connection to discharge any electrostatic charge from your body.
3 Place this product on a flat, level surface, with the front side pointing up.
4 Open the battery slot on the top or bottom of this product.
5 Remove the spent battery from the tray by touching the battery from the bottom.
6 Put the new battery on the tray in accordance with the polarity markings in the tray and on the battery.
7 Insert the tray into the battery slot.
8 Reconnect the power supply to this product.
NOTE: After reconnecting the power supply, set up the clock again. Refer to your screen editing software manual on how to set up the clock.
Question: What is the size of HMIST6400 HMISTW6400 HMISTM6400 Protective Film HMI Panel Glass?
Answer: The Schneider Terminal HMIST6400 HMISTW6400 HMISTM6400 Touch Screen Monitor Front Overlay is 7-inch.
Common misspellings:
HMIST400HMIST640
HMITSW6400
HM1STW6400
HMISTTM6400
HMISTM66400
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
