HMIST6200 HMISTW6200 HMISTM6200 Film Touch Screen
HMIST6200 HMISTW6200 HMISTM6200 Film Touch Screen
Schneider Harmony ST6&STW6 HMIST6200 HMISTW6200 HMISTM6200 Touch Digitizer Glass Protective Film Replacement
Order each part separately is available
The front face of Schneider Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 Touch screen panel glass protective film HMI product's level of resistance is equivalent to these standards, oils that should have no effect on Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 front overlay hmi panel glasa product can possibly harm Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 Touch digitizer protective film product. Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 Touchscreen panel front overlay terminal can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 touch panel overlay product for long periods of time. If Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 product's front face protection sheet peels off, these conditions can lead to the ingress of oil into Harmony ST6 product and separate protection measures are suggested.
Also, if non-approved oils are present, Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 may cause deformation or corrosion of the front panel's cover. Therefore, prior to installing this product, be sure to confirm the type of conditions that will be present in this Harmony ST6 HMIST6200 HMISTW6200 HMISTM6200 product's operating environment. If the installation gasket is used for a long period of time, or if this product and its gasket are removed from the panel, the original level of protection cannot be kept. To maintain the original protection level, be sure to replace the installation gasket regularly. VICPAS supply HMIST6200 HMISTW6200 HMISTM6200 Harmony ST6&STW6 Schneider Terminal Front Overlay Touch screen glass with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the HMIST6200 HMISTW6200 HMISTM6200 Harmony ST6&STW6 Schneider Front Overlay Touch Screen Panel.
Part Number: | HMIST/STW/STM6200 |
Display device: | Colour TFT LCD |
Screen diagonal: | 4 inch |
Warranty: | 365 Days |
Product Line: | Harmony ST6&STW6 |
Rated Voltage: | 24 V DC (+/- 20 %) |
Operating Temp.: | 0…50 °C |
Storage Temp.: | -20…60 °C |
Operating altitude: | 2000 m |
Display colour: | 16 million colours |
Related Schneider Harmony ST6&STW6 Series Part No. :
Harmony ST6 & STW6 | Description | Inventory status |
HMIST6200 | Schneider Harmony ST6 Touch Screen Protective Film Repair | In Stock |
HMIST6400 | Harmony ST6 Schneider Touch Panel Protective Film Replacement | Available Now |
HMIST6500 | Schneider Harmony ST6 Touchscreen Protective Film Repair | In Stock |
HMIST6600 | Harmony ST6 Schneider HMI Touch Screen Glass Protective Film | Available Now |
HMIST6700 | Schneider Harmony ST6 Touch Screen Panel Front Overlay Repair | In Stock |
HMISTW6200 | Schneider Harmony STW6 Front Overlay Touch Membrane | In Stock |
HMISTM6200 | Schneider Harmony STW6 HMI Touch Glass Front Overlay Repair | In Stock |
HMISTW6400 | Schneider Harmony STW6 Touch Digitizer Glass Overlay Repair | Available Now |
HMISTM6400 | Schneider Harmony STW6 HMI Panel Glass Protective Film | Available Now |
HMISTW6500 | Harmony STW6 Touch Screen Monitor Front Overlay Replacement | In Stock |
HMISTW6600 | Schneider Harmony STW6 MMI Touch Screen Front Overlay | In Stock |
HMISTW6700 | Schneider Harmony STW6 HMI Touch Screen Protective Film | In Stock |
Harmony ST6 & STW6 | Description | Inventory status |
Schneider Harmony ST6&STW6 HMI Manuals PDF Download:
FAQ:
Question: How to replace the HMIST6200 HMISTW6200 HMISTM6200 Installation Gasket?
Answer:
1. Place this product on a flat, level surface, with the display face pointing down.
2. Remove the gasket from this product.
3. Attach the new gasket to this product. Insert the protrusions from the four corners of the gasket into the corresponding holes in the corners of this product.
Depending on your model, there may be additional protrusions. In the following, refer to the figure on the right and insert the protrusions accordingly.
NOTE: When using a tool to insert the gasket, make sure the tool does not catch the rubber
gasket and cause a tear.
Question: When an alarm appears on Schneider HMIST6200 HMISTW6200 HMISTM6200 Protective Film Touch Panel Glass Terminal, what does it means?
Answer:
• The alarm relay is closed (if this function is selected).
• The alarm strip is updated.
Common misspellings:
HMIST200MIST6200
HMISWT6200
HMISTW6z00
HMlSTM6200
HMISTM66200
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content