2711P-T12C4A9 Panelview Plus 6 Touch Screen Panel

Order each part separately is available

As a member of the Panelview Plus 6 Series, this terminal has three modular parts including a display module, a logic module, and a communications module. Users and operators of the 2711P-T12C4A9 touch panel protective film can monitor and control running applications via this terminal. The open system has to launch the Windows Explorer Desktop when started, while the closed system helps to launch the FactoryTalk View Machine Edition application. When an internal Compact Flash is installed application development time can be reduced through the use of the flash memory and pre-loaded/pre-activated FactoryTalk software.

The communication module on the 2711P-T12C4A9 touch screen panel front overlay, (which is installed on the back of the logic module) allows communication to DH+, RS-232, DH-485, Ethernet, and RIO. It can be powered either by 24 Volts DC or 85 to 264 Volt AC inputs. The fact that the 2711P-T12C4A9 can run on DC makes this device economical, thus reducing costs. The DC power supply connection is made through the quick connect plug or the other optional input plugs. It is important to do a thorough check on all the parts of this PanelView to avoid shocks. Users can install other applications on this device to aid them in their daily operations.

The PanelView displays are set out in a way that is simple for installation and modular expansions by use of expansion, communication, logic and control modules. 2711P-T12C4A9 touchscreen overlay when purchased from the manufacturer or authorized dealers, is accompanied by power Terminal blocks, 4-6 mounting clips and an installation manual for use by a technician.

VICPAS supply panelview Plus 6 2711P-T12C4A9 HMI Touch Screen, Front Overlay, Label, LCD Display, Enclosure, Gasket and Mounting Clips. All of them with VICPAS 365-day warranty and support Urgent Worldwide Shipping.