3080061-04 GLC150-BG41-ADPC-24V Touch Membrane Front Overlay

Order each part separately is available

To Prevent 3080061-04 GLC150-BG41-ADPC-24V Front Overlay Touch Panel GLC Damage:
• Never strike the 3080061-04 GLC150-BG41-ADPC-24V touch panel with a hard or heavy object, or push on the touch panel with too much force, since it may damage the unit.
• If the 3080061-04 GLC150-BG41-ADPC-24V Protective Film Touch Screen Panel GLC is used in an environment with temperatures and humidity in excess of the allowed range, the GLC may malfunction and/or its useful life may be shortened.
• Do not allow water, liquids, metal particles, or charged particles to enter inside the GLC's chassis, since they can cause either a GLC malfunction or an electrical shock.
• Do not use this 3080061-04 GLC150-BG41-ADPC-24V Touch Digitizer Glass Protective Film unit in areas where the temperatures can change drastically, causing condensation to form inside the unit. This can cause the unit to malfunction.
• Avoid restricting the GLC's naturally occurring ventilation, or storing or using the GLC in an environment that is too hot.
• Avoid using or storing the GLC in direct sunlight, or in excessively dusty or dirty environments.
• Because the GLC is a precision instrument, do not store or use the GLC where a sudden shock or excessive vibration can occur.
• Do not store or use the GLC where chemicals and acids evaporate, or where chemicals and acids are present in the air.
• Do not use paint thinner or organic solvents to clean the 3080061-04 GLC150-BG41-ADPC-24V HMI Panel Glass Front Overlay GLC.
• Due to the danger of unforeseen accidents, be sure to back up the GLC's screen data and logic programs regularly.
• After turning this unit OFF, be sure to wait a few seconds before turning it ON again. If the unit is started too soon, it may not start up correctly.