HMI520M-006 HMI520T E HMI520T-007E Protective Film Touch Screen Film

Order each part separately is available

Note when using the product:

The following places should be avoided when using Weinview HMI HMI520M-006 HMI520T E HMI520T-007E Front Overlay Touch Digitizer Glass:
1. The place that the temperature and humidity exceeds the range of the specifications
2. The place with high humidity that may cause condensed water
3. The place that the temperature changes acutely
4. The place that is shined by ultraviolet ray
5. The place with heavy dust
6. The place that is polluted by chemicals
7. The place that is polluted by oily substance
8. The place with heavy shock and vibration
9. The place that is exposed to sunshine and wind directly
10. Away from these places in order to protect HMI520M-006 HMI520T E HMI520T-007E Protective Film Touch Screen Tablet from damage.
The communication cables that connect HMI and PLC should be kept far from HMI520M-006 HMI520T E HMI520T-007E Touch Panel Protective Film that may generate interference, like VFD, motor at the same time. At the same time do not put the control cable, power cable and high line in the same wireway or nearby, or the interference may causes the malfunction of Weintek Weinview HMI520M-006 HMI520T E HMI520T-007E Touch Membrane Front Overlay. Please ensure the security of the system before you power on the HMI.