eMMI 9104P EMMI-9104P-N Protective Film MMI Panel Screen

Order each part separately is available

Precautions on Install

Do not install HMI Weinview eMMI 9104P EMMI-9104P-N Front Overlay HMI Touch Glass which exceeds allowed temperature. Product can be damaged or shorten the life. Especially Install environment as below should be avoided.
1. Do not Install product to the place which the ambient temperature is out of limits, from 0°C to 50°C or on the surface of control board which high pressure equipment is installed.
2. Do not install eMMI 9104P EMMI-9104P-N Touch Screen Panel Protective Film to the place where strong shock or vibration continuously have impacted on product.
3. The space between back of product and back of control board must be more than 100mm for maintenance and ventilation.
4. Do not storage and operate in the place in direct sunlight. By the strong ultraviolet rays can degrade the quality of LCD Displays.
5. Do not strike Weinview HMI eMMI 9104P EMMI-9104P-N HMI Touch Glass Front Overlay with a hard or pointed object (such as drill, driver, pen, etc)or press on the touch screen with too much force. It may cause malfunction of the touch panel by damaging front sheet.
6. Do not use or store in a severe vibration environment.
7. Do not allow water, liquids or foreign substances such as metal powder into eMMI 9104P EMMI-9104P-N Protective Film Touch Membrane. It can damage products or cause malfunction by an electric shock.