MT6103iP MT6102iQ MT8102iP Touch Membrane LCD Display Overlay Case

Order each part separately is available

Environmental Considerations

Care should be taken when locating MT6103iP MT6102iQ MT8102iP LCD Display Screen, Front Overlay, Power Supply Connector, Screws, Front Case, Gasket, Back Cover, Mounting Brackets and Touch Screen Monitor behind the unit to ensure that AC power wiring, PLC output modules, contactors, starters and relays, and any other source of electrical interference are located away from the back of the unit. Particular note should be taken to the position of variable speed drives and switching power supplies. Their input and load cables should be screened to a central star earth point.

Weinview touch screen MT6103iP MT6102iQ MT8102iP Mounting Brackets, Plastic Shell, Power Supply Connector, Touch Panel, LCD Screen, Screws, Gasket and Protective Film is designed for use in factory environments, capable of operating within temperatures ranging from 32 to 113 °F (0 to 45 °C), typical of most industrial settings. It may not be suitable for certain outdoor applications, so it is advised to consult the factory for recommendations on outdoor usage. There is a front bezel of the iP Series, ensuring that when properly installed in the panel, the panel's rating remains intact, preventing fluid entry during washdowns.

Do not operate HMI Weinview MT6103iP MT6102iQ MT8102iP Screws, Power Supply Connector, Mounting Brackets, Front Overlay, Front Case, Touch Screen Glass, LCD Display Screen and Back Cover in areas with explosion hazards from flammable gases, vapors, or dust. Additionally, the unit should not be installed in locations with rapid temperature changes or high humidity, as this can cause condensation inside the device. Avoid environments with severe mechanical vibrations or shocks during installation because it will do harm to MT6103iP MT6102iQ MT8102iP Touch Screen, Protective Film, LCD Display, Back Cover, Front Cover, Gasket, Mounting Brackets, Screws and Power Supply Connector.