eMT3150A Touch Screen Display Protective Film Repair

Cautions

When you've assembled Weintek Weinview eMT3150A Touch Panel Protective Film, you may encounter the following problems.

About the touchscreen calibration, if you have trouble with it, press and hold anywhere on the screen when HMI starts until it enters touchscreen calibration mode. If the display does not come on within 5 seconds of power up, remove power. In addition, a resettable fuse will protect against overcurrent faults in DC circuit and the resetting will take place after a period of time. Check wiring for proper connections and try to power up again. The system designer should be aware that devices in Controller systems could fail and thereby create an unsafe condition, it will damage the eMT3150A Front Overlay Touch Membrane. Furthermore, electrical interference in an operator interface can lead to equipment start-up, which could result in property damage and/or physical injury to the operator.

Tips about cleaning HMI Weinview eMT3150A Touch Screen Glass Front Overlay: disconnect the equipment from all power outlets before cleaning. Use only a damp cloth for cleaning. Do not use liquid or spray detergents. Never pour any liquid into an opening. This may cause fire or electric shock. After cleaning, you should keep eMT3150A Protective Film Touch Digitizer away from humidity.