IDEC HG9Z-4DCPN02 Protective Sheet Front Overlay Repair
Categories | Other IDEC Series |
---|---|
Brand | VICPAS |
Model | HG9Z-4DCPN02 |
Warranty | 365 Days |
Shipping | 2-4 workdays |
Brand | IDEC |
Supply Parts | Touch Screen Monitor Front Overlay |
FOB port | Guangzhou, Shenzhen, Hongkong |
Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union |
Update Time | Dec 23,2024 |
IDEC HG9Z-4DCPN02 Front Overlay Replacement
Order each part separately is available
Protective Sheet of IDEC HG9Z-4DCPN02 Protective Film
1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the HG9Z-4DCPN02 Front Overlay, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using the HG9Z-4DCPN02 Overlay Film.
5. When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. HG9Z-4DCPN02 Front Overlay has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
6. Make sure that the specifications of the product conform to your requirements, and that no parts are missing or damaged due to accidents during transportation.
Mounting Caution
If the mounting clips are tightened obliquely to the panel, the HG9Z-4DCPN02 Protective Film may fall off the panel. When installing the IDEC Terminal into a panel cut-out, make sure that the gasket is not twisted especially when re-installing, take special care because any twists in the gasket will impair the waterproof characteristics.
Specifications:
The table below describes the parameters of the IDEC HG9Z-4DCPN02 Protective Film HMI.
Operating Environment: | Free from Corrosive Gases |
Operating Humidity: | 10 to 90% RH |
Mounting: | Panel Mounting |
Storage Temperature: | -20 ~ 70°C |
Display Type: | TFT Color |
Screen Type: | Analog Resistive Film |
Model Number: | HG9Z-4DCPN02 |
Operating Temperature: | -20 ~ 60°C |
Warranty: | 1-Year Warranty |
Brand: | IDEC |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG1P-ST32YBFH-B0 | IDEC HG1P Series Front Overlay Touch Screen Panel Replacement | In Stock |
HG1P-ST32ZBFH-B0 | IDEC HG1P Series Touch Digitizer Glass Protective Film Repair | Available Now |
HG2J-7UT22TF-B | IDEC HG2J Series Overlay Film Touch Membrane Replacement | In Stock |
HG9Z-1D4PN05 | IDEC HG9Z Series Front Overlay Repair | Available Now |
HG9Z-2D5PN05 | IDEC HG9Z Series Protective Film Replacement | In Stock |
HG9Z-3D8PN02 | IDEC HG9Z Series Overlay Film Repair | Available Now |
HG9Z-3DA2PN02 | IDEC HG9Z Series Front Overlay Replacement | In Stock |
IDEC HMI | Description | Inventory status |
IDEC HMI Manuals PDF Download:
FAQ:
Question: How to adjust HG9Z-4DCPN02 Front Overlay?
Answer:
Question: How can I create and modify screens on the HG9Z-4DCPN02 HMI?
Answer: HG9Z-4DCPN02 HMIs usually come with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.
Common misspellings:
HG9-4DCPN02
HG9Z-4DCPN0
HG9Z-4DCPN022
HG9Z-4DCP0N2
HG9Z-4DCNP02
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content