IDEC HG9Z-3DA2PN02 Protective Sheet Overlay Repair
Categories | Other IDEC Series |
---|---|
Brand | VICPAS |
Model | HG9Z-3DA2PN02 |
Warranty | 365 Days |
Shipping | 2-4 workdays |
Brand | IDEC |
Supply Parts | Protective Film |
FOB port | Guangzhou, Shenzhen, Hongkong |
Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union |
Update Time | Nov 9,2024 |
IDEC HG9Z-3DA2PN02 Front Overlay Replacement
Order each part separately is available
Mounting
Place the HG9Z-3DA2PN02 Front Overlay in a panet cut-out and fasten with the attached mounting clips at four places uniformly. Do not tighten excessively, otherwise the Terminal may be defommed or damaged. When installing the HG9Z-3DA2PN02 Protective Film vertically, make sure that the power input terminal is on the upper side. If the mounting clips are tightened obliquely to the panel, the IDEC HMI may fall off the panel. Please attach this product to press down HG9Z-3DA2PN02 Protective Film in the portion of the mountain of gasket. Once removing especially in the attaching again, be careful. There is a possibility that it may become impossible to maintain waterproof ability.
Notes for Operation
The screen becomes blank when the backlight is burnt out; however, the HG9Z-3DA2PN02 Front Overlay remains enabled. Incorrect touch panel operation will occur when operating the touch panel when the backlight appears to be turned off but is actually burnt out. Please note that this erroneous operation may result in damage. At temperatures over the rated operating temperature, the clock accuracy is affected. Adjust the clock before use. For applications which require clock accuracy, adjust the clock periodically. When more than one button is pressed at the same time, due to the detection characteristics of HG9Z-3DA2PN02 Overlay Film, only the gravity center of the pressed area is sensed and the unit assumes that only one button is pressed. Thus, when more than one button is pressed simultaneously, the resulting operation is not guaranteed.
Specifications:
The table below describes the parameters of the IDEC HG9Z-3DA2PN02 Overlay Film HMI.
Operating Humidity: | 10 to 90% RH |
Operating Temperature: | -20 ~ 60°C |
Mounting: | Panel Mounting |
Storage Temperature: | -20 ~ 70°C |
Brand: | IDEC |
Model Number: | HG9Z-3DA2PN02 |
Display Type: | TFT Color |
Warranty: | 1-Year Warranty |
Screen Type: | Analog Resistive Film |
Corrosion Immunity: | Free from corrosive gases |
Related IDEC HMI No. :
IDEC HMI | Description | Inventory status |
HG1P-ST32YBFH-B0 | IDEC HG1P Series Front Overlay Touch Screen Panel Replacement | In Stock |
HG1P-ST32ZBFH-B0 | IDEC HG1P Series Touch Digitizer Glass Protective Film Repair | Available Now |
HG2J-7UT22TF-B | IDEC HG2J Series Overlay Film Touch Membrane Replacement | In Stock |
HG9Z-1D4PN05 | IDEC HG9Z Series Front Overlay Repair | Available Now |
HG9Z-2D5PN05 | IDEC HG9Z Series Protective Film Replacement | In Stock |
HG9Z-3D8PN02 | IDEC HG9Z Series Overlay Film Repair | Available Now |
HG9Z-4DCPN02 | IDEC HG9Z Series Protective Film Repair | Available Now |
IDEC HMI | Description | Inventory status |
IDEC HMI Manuals PDF Download:
FAQ:
Question: How to maintain HG9Z-3DA2PN02 Machine?
Answer: To wipe off smears on the lens and screen surfaces, use a soft cloth dampened with the following solvents. Use neutral detergent(squeeze the cloth tightly) or alcoholic solvents. Do not use solvents such as thinner, ammonia, strong acid and strong alkaline.
Question: Can I connect external devices to the HG9Z-3DA2PN02 HMI?
Answer: Yes, the HG9Z-3DA2PN02 HMIs typically offer various communication ports, such as Ethernet, USB, RS232, or RS485. These ports allow you to connect external devices, such as PLCs, sensors, or other control equipment, for data exchange and system integration.
Common misspellings:
G9Z-3DA2PN02
HG9Z3DA2PN02
HG9Z-3DA2PN0
HG9Z-3DA2PN002
HG9Z-3DA2P0N2
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content