QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A Touchscreen Front Overlay
QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A Touchscreen Front Overlay
GE Fanuc QuickPanel jr. Series QPJ-2D101-L2P QPJ-2D100-S2P QPJ2D100S2P SERIES A Touch Screen Front Overlay Repair
Order each part separately is available
The serial interface port connects the QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A HMI Touch Glass Protective Film QUICKPANEL to your PLC. Refer to the cable section to determine the correct cable to use with your PLC. Factory cables are cut to approximately 12’, which is suitable for most applications. Some cables are available in longer lengths on special order from Total Control Products, Inc. or you can fabricate your own. Use the cable diagrams found in the cable section for correct wiring. Remember that RS232 cables are reliable up to approximately 50’. The serial interface pin assignments are shown in the following drawing. *NOTE: Some cables, such as the HMI-CAB-C84, are designed for use on proprietary networks. These cable assemblies contain active network interface circuits. Because these cables are licensed from other manufacturers, there are no cable diagrams or circuit drawings.
CANopen Module on a QPJ-2D101-L2P QPJ-2D100-S2P QPJ2D100S2P SERIES A Front Overlay Touch Membrane QUICKPANEL jr.
Attach the power wires to the QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A Touch Screen Panel Front Overlay terminal block on the display. Align the option module connector with the mating connector on the display. Press the module firmly into the display chassis and tighten the screws. The option module is shown below.
Specifications:
The table below describes the parameters of the GE Fanuc QPJ-2D101-L2P QPJ-2D100-S2P QPJ2D100S2P SERIES A HMI Panel Glass Front Overlay QuickPanel jr.
Brand: | GE Fanuc |
Display Version: | Mono/STN LCD |
Product Line: | GE Fanuc QuickPanel Jr. |
Storage Temperature: | -20°C to 60°C |
Warranty: | 12 Months Warranty |
Backlight Life: | 15,000 - 20,000 hours |
Display Size: | 4.7" (Diagonal) |
Display Resolution: | 320 x 240 pixels |
Input Voltage: | DC 20.4V to DC 27.6V |
Touchscreen: | Resistiv |
Related GE Fanuc QuickPanel jr. Series HMI Part No. :
Quickpanel Jr. HMI | Description | Inventory status |
QPJ2D100L2P | GE FANUC QuickPanel Jr. Touch Screen Protective Film Replacement | In Stock |
GQPJ2D100L2P | GE FANUC QuickPanel, Jr. Touch Panel Protective Film Repair | Available Now |
GQPJ2D100L2P-A | GE FANUC QuickPanel Jr. HMI Touch Screen Glass Protective Film | Available Now |
GQPJ2D100S2P | GE Fanuc QuickPanel Jr. Touch Screen Panel Front Overlay Repair | In Stock |
QPJ1D100L2P | GE FANUC Quickpanel Jr Front Overlay Touch Membrane Replacement | In Stock |
QPJ1D100S2P | GE Fanuc QuickPanel Jr Touch Glass Front Overlay Repair | In Stock |
QPJ2D100L2P SERIES A | GE Fanuc QuickPanel Jr. Touch Digitizer Glass Overlay Repair | Available Now |
QPJ2D100S2P | GE FANUC Quickpanel Jr. HMI Panel Glass Protective Film | Available Now |
QPJ2D100S2P SERIES A | GE FANUC QuickPanel Jr. Touch Screen Monitor Front Overlay | In Stock |
QPJ2D101L2P | GE Fanuc QuickPanel Jr MMI Touch Screen Front Overlay Replacement | In Stock |
QPJ2D101S2P | GE Fanuc QuickPanel Jr. HMI Touch Screen Protective Film | Available Now |
QuickPanel Jr. HMI | Description | Inventory status |
GE Fanuc QuickPanel Jr. Series Manuals PDF Download:
FAQ:
Question: QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A Panel Installation
Solution: The QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A QUICKPANEL jr. display is secured to the panel with pressure clamps on the top and bottom of the display.
Make the panel cutout as shown in the drawing.
The O-ring gasket is secured to the display body by pressing it into the slot provided. The following drawing shows how the gasket is secured to the display.
Insert the display through the panel opening and install the panel clamps. The clamp screws are turned clockwise to tighten the display to the panel. The fastening torque necessary for waterproofing is 0.5 ~ 0.6Nm.
Question: Can I connect the QPJ-2D101-L2P QPJ-2D100-S2P QPJ2D100S2P SERIES A Protective Film Touch Screen Glass QUICKPANEL Jr. to a PLC or other control devices from different manufacturers?
Answer: Yes, the QPJ2D101L2P QPJ2D100S2P QPJ2D100S2P SERIES A Touch Digitizer Glass Front Overlay QUICKPANEL Jr. supports communication protocols such as Modbus and Ethernet/IP, allowing it to interface with a wide range of PLCs and control devices from different manufacturers.
Common misspellings:
QPJ-2D101-L2P QPJ-2D100-S2P QPJ2D1002P SERIES AQPJ-2D101-2P QPJ-2D100-S2P QPJ2D100S2P SERIES A
QPJ-2D101-L2P QPJ-2D10-0S2P QPJ2D100S2P SERIES A
QPJ-2D101-L2P QPJ-2D100-S2P QPJ2D100SZP SERIES A
QPJ-2D1011-L2P QPJ-2D100-S2P QPJ2D100S2P SERIES A
- Loading...
- Tel
- *Title
- *Content
- Fast Quote
- Worldwide Shipping
- 12 Months Warranty
- Customize Service
- Tel
- *Title
- *Content