VT2-12F VT2-12FB Touch Digitizer Glass Front Overlay

Order each part separately is available

VT2-12F VT2-12FB Touch Screen Panel Front Overlay HMI Ambient temperature/humidity precautions
Pay attention to the following points when installing the VT2-12F VT2-12FB Front Overlay Touch Membrane VT2 inside a control panel.
• Do not install the VT2 in a location where the ambient temperature exceeds the 0 to 50°C range (0 to 40°C on VT2-12F) or the ambient humidity exceeds the 35 to 85%RH range.
• If the ambient temperature exceeds the above range, install a forced air cooling fan or air conditioner to keep the ambient temperature within this range.
• Allow as much space as possible between the VT2 and surrounding structures and other components to improve maintainability, operability and ventilation.
• Do not mount the VT2-12F VT2-12FB HMI Touch Glass Protective Film VT2 directly above equipment (e.g. heaters, transformers, inverters and equipment with large resistance) that generate lots of heat.
• Do not use PORT1 (USB) in locations that are subject to vibration or impact. The USB connector is not provided with a locking function, so the USB cable may become loose or disconnected, and disrupt communications.