3HAB8101-8/08Z 3HAB8101-8/09B 3HAB8101-8/10A 3HAB8101-8/10B Housing Repair

The 3HAB8101-8/08Z 3HAB8101-8/09B 3HAB8101-8/10A 3HAB8101-8/10B Body Housing operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled:
– no high explosive risks
– no strong magnetic fields
– no direct sunlight
– no large, sudden temperature changes
• Install the 3HAB8101-8/08Z 3HAB8101-8/09B 3HAB8101-8/10A 3HAB8101-8/10B Plastic Shell operator panel according to the accompanying installation instructions.
• Ground the operator panel according to the accompanying installation instructions.
• Only qualified personnel may install the operator panel.
• Separate the high voltage, signal and supply cables.
• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet.
• Peripheral equipment must be appropriate for the application and location.
• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.
• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.

VICPAS supply DRIVE UNIT GT DSQC346G 3HAB8101-8/08Z 3HAB8101-8/09B 3HAB8101-8/10A 3HAB8101-8/10B Enclosure with 365 Days warranty and support Urgent Worldwide Shipping.