Quick Service for Full HMI Parts Replacement
Home / All / for Siemens / Simatic MTP Series /

Siemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer Glass

Siemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer Glass

Siemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer Glass
Siemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer GlassSiemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer GlassSiemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer GlassSiemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer GlassSiemens MTP2200 6AV2128-3XB06-0AX1 Touch Digitizer Glass
CategoriesSimatic MTP Series
BrandVICPAS
Model6AV2128-3XB06-0AX1
BrandSiemens
Size21.5 inch
Warranty365 Days
Product LineSimatic HMI Unified Comfort Panels Series
SupplyTouch Screen Monitor and Protective Film
Shipping2-4 workdays
Part Number6AV21283XB060AX1
Part Number6AV2 128-3XB06-0AX1
Part Number6AV2128-3XB06-0AX1
Terms of PaymentWestern Union, T/T, PayPal, Credit Card
Download
Update TimeNov 22,2024
Detail Information

SIMATIC HMI Unified Comfort Panels 6AV2128-3XB06-0AX1 Front Overlay Touch Screen Replacement

Order each part separately is available

SIMATIC HMI Unified Comfort Panels Standard 6AV2128-3XB06-0AX1 Protective Film Touch Screen Repair Replacement

The following clearances are required around the 6AV2 128-3XB06-0AX1 HMI Panel Glass Protective Film HMI device to ensure sufficient self-ventilation:
● At least 15 mm to both the right and left of the mounting cutout (in x direction) to allow for insertion of the mounting clips during installation
● At least 50 mm above and 50 mm below the mounting cutout (in the y direction) for ventilation
● At least 10 mm behind the rear panel of the 6AV21283XB060AX1 Front Overlay Touch Panel HMI device (in the z direction)
The following figure shows the clearances for mounting the 6AV2128-3XB06-0AX1 Protective Film Touch Screen Panel HMI devices in landscape format and portrait format using MTP1900 Unified Comfort as an example:
clearances are required around the HMI device to ensure sufficient self-ventilation


6AV2128-3XB06-0AX1 Touch Digitizer Glass Front Overlay Unified Comfort Panel is available in two design versions: Standard design: With Siemens and SIMATIC HMI branding, and a silver-colored aluminum frame Neutral design: No branding, and a black-colored aluminum frame




Specifications:

The table below describes the parameters of the SIMATIC HMI MTP2200 Unified Comfort 6AV2128-3XB06-0AX1 Front Overlay Panel Glass HMI Parts.

Brand: Siemens
Backlight: LED
Product Line: HMI Unified Comfort Panels
Resolution: 1920 x 1080 pixels
Warranty: 12 Months Warranty
Ambient temperature: 10 to 90% RH
Display Type: TFT Color LCD
Power supply: 24 V DC
Storage Temperature: -20 to 60 °C (-4 to 140 °F)
Touch Size: 21.5"


Related SIMATIC HMI Unified Comfort Panels Standard Series HMI Part No. :

SIMATIC MTP HMI Description Inventory status
6AV2128-3QB06-0AP0 SIMATIC HMI MTP1500 Unified Comfort Touch Membrane Repair In Stock
6AV2128-3QB06-0AX0 SIMATIC HMI Unified Comfort Panels Series Touch Glass Repair In Stock
6AV2128-3QB06-0AX1 SIMATIC HMI Unified Comfort Panels Series Touch Digitizer Glass Repair Available Now
6AV2128-3QB36-0AX0 SIMATIC HMI MTP1500 Unified Comfort HMI Panel Glass Replacement Available Now
6AV2128-3QB36-0AX1 SIMATIC HMI Unified Comfort Panels Series Touch Screen Monitor In Stock
6AV2128-3UB06-0AP0 SIMATIC HMI Unified Comfort Panels Series MMI Touch Screen Replacement In Stock
6AV2128-3UB06-0AX0 SIMATIC HMI Unified Comfort Panels Series HMI Touch Screen Panel Available Now
6AV2128-3UB06-0AX1 SIMATIC HMI MTP1900 Unified Comfort Panels Series Touchscreen Repair In Stock
6AV2128-3UB36-0AX0 SIMATIC HMI Unified Comfort Panels Series HMI Touch Screen Glass Available Now
6AV2128-3UB36-0AX1 SIMATIC HMI Unified Comfort Panels Series Touch Digitizer Repair In Stock
6AV2128-3XB06-0AP0 SIMATIC HMI MTP2200 Unified Comfort Series Touch Screen Replacement In Stock
6AV2128-3XB06-0AX0 SIMATIC HMI MTP2200 Unified Comfort Series Touch Panel Repair In Stock
6AV2128-3XB06-0AX1 SIMATIC HMI MTP2200 Unified Comfort Touch Membrane Repair Available Now
6AV2128-3XB36-0AX0 SIMATIC HMI Unified Comfort Panels Series HMI Panel Glass Repair In Stock
6AV2128-3XB36-0AX1 SIMATIC HMI Unified Comfort Panels Series Touch Digitizer Glass Available Now
Unified Comfort Panel Description Inventory status


SIMATIC HMI MTP2200 Unified Comfort Series HMI Manuals PDF Download:

  • 6AV21283XB060AP0 Datasheet
  • 6AV21283XB060AX0 Datasheet
  • 6AV21283XB060AX1 Datasheet
  • 6AV21283XB360AX0 Datasheet
  • 6AV21283XB360AX1 Datasheet
  • HMI Unified Comfort Panels Operating Instructions
  • Presentation - WinCC Unified

  • FAQ:

    Question: How to commission the HMI device?

    Answer: The following procedure describes how to typically include the HMI device during operation.
    1. If you want to use the service concept with automatic backup, then insert a SIMATIC SD memory card ≥ 32 GB into the "X50 SYSTEM" slot.
    Activate the automatic backup in the Control Panel under "Service and Commissioning" > "Automatic Backup" via the "Start" button.
    2. Configure the HMI device in WinCC. When configuring, consider your security concept in the security settings. Configure a user administration. Define a user with the "Control Panel access" function right who can protect the HMI device against unauthorized access to the Control Panel.
    3. Make sure that the network address of the HMI device corresponds to the configured network address.
    4. Transfer your project including user administration via WinCC from the configuration PC to the HMI device.
    5. If necessary, have the Control Panel protected against unauthorized access by an HMI device administrator under "Security" > "Control panel access".
    6. Check the authorizations of the operators in the Control Panel under "Security" > "User management" and adjust the settings if necessary.
    7. If necessary, deactivate one or more interfaces for storage media under "Devices And Input" > "Hardware interfaces".
    8. Check date and time under "Language, Region and Formats" > "Date and time".
    9. Set the required delay time for the start of the project under "Runtime Properties" > "Automatic runtime start".
    10. Check in the Control Panel under "Apps" whether all apps required for the operation are available.
    If additional apps are required, then install these via "Apps" > "App Management".


    Question: What is SIMATIC HMI MTP2200 Unified Comfort 6AV2128-3XB06-0AX1 Touch Screen and Protective Film HMI parts price?

    Answer: Submit a fast quote, send VICPAS an email for best price.

    Common misspellings: 

    6AV128-3XB06-0AX1
    6AV2128-3B06-0AX1
    6AV2128-3XB060-AX1
    6AV2128-3XB06-0AXI
    6AV21128-3XB06-0AX1
    Review
    • Loading...
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Do you want to quickly know the product quotation you need?
    • Fast Quote
    • Worldwide Shipping
    • 12 Months Warranty
    • Customize Service
    subscription
    KEEP IN TOUCH
    Please send your message to us
    *Email
    Tel
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    CONTACT US
    QR code
    Mobile Web