Lauer PCS-300 PCS-600 PCS-600 FZ Membrane Keyboard Repair

Order each part separately is available

The modular operating console PCS-300 PCS-600 PCS-600 FZ is equipped with a graphic LCD display and offers the maximum freedom of configuration.
The PCS-300 PCS-600 PCS-600 FZ Switch Membrane display enables any representation of information and variables by means of idle pages, operating pages, messages, help pages, status and softkey rows.
Via an internal bus, one module offering a wide range of functions can be plugged in at the rear. This is a prerequisite for an extremely flexible use of PCS midi.

The electrical connection between a programmable controller of any type and the PCS is affected by a special adapter cable.
Data communication is based on a principle that can easily be understood:
The PCS-300 PCS-600 PCS-600 FZ Terminal Keypad PCS writes functions or preset values into previously defined programmable controller word areas. These functions or values are then read and interpreted by the programmable controller.
The programmable controller writes functions or actual values into previously defined word areas. These functions or values are then automatically read and interpreted by the PCS-300 PCS-600 PCS-600 FZ Membrane Keyboard PCS.
Depending on the programmable controller, a maximum of 256 words (with 16 bits each) or a total of 4096 I/O, are available for PCS/programmable controller communication.
The words from W 00 up to W 40 are permanently assigned in the PCS-300 PCS-600 PCS-600 FZ Switch Membrane PCS midi. Words 41 to 255 are available for any operating projects. The words can be assigned individually.