CP676 1SAP576100R0001 Touch Panel Protective Film Repair
CP676 1SAP576100R0001 Touch Panel Protective Film Repair
| Categories | Control Panel 600 |
|---|---|
| Brand | VICPAS |
| Model | CP676 1SAP576100R0001 |
| Brand | Vicpas |
| Supply | Protective Film and Touch Digitizer Glass |
| Shipping | 2-3 workdays |
| Size | 15-inch |
| Warranty | 365 Days |
| FOB port | Guangzhou, Shenzhen, Hongkong |
| Terms of Payment | Western Union, MoneyGram, T/T, Paypal, PayPal, Credit Card |
| Update Time | Nov 9,2024 |
Control Panel 600 Series CP676 1SAP576100R0001 Resistive Touch Panel Front Overlay Repair
Order each part separately is available
The system settings tool has two operating modes: User Mode and System Mode. The difference between them is the number of available options.
System settings in User Mode is activated from the contextual menu, accessible by clicking and holding any unused area on the CP676 1SAP576100R0001 touchscreen for a few seconds. Default holding time is 2 sec. This is a runtime parameter that could have been changed.
System settings in System Mode can be activated with the so-called emergency system access procedure. This procedure consists in tapping in the middle of the CP676 1SAP576100R0001 touchscreen with a finger at a high frequency while the system is powering up. The emergency procedure can only be accessed at power up.
VICPAS supply Control Panel 600 Series CP676 1SAP576100R0001 Touch Digitizer Monitor and Front Overlay with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the CP676 1SAP576100R0001 HMI Touch Panel Parts.
| Part Number: | CP676 1SAP576100R0001 |
| Display Resolution: | 1024 × 768 pixels |
| Display Type: | TFT-LCD |
| Diagonal (inches): | 15” widescreen |
| Warranty: | 365 Days |
| Ambient Humidity: | 20 - 90% RH non-condensed |
| Touch Design: | design passepartout |
| Touch Type: | Resistive touch screen, 4 wires |
| Brightness: | 300 cd/m2 |
| Backlight: | LED |
Related Control Panel 600 Series Terminals Part No. :
| Control Panel 600 Series | Description | Inventory status |
| CP650 1SAP550100R0001 | CP650 1SAP550100R0001 10.4'' HMI Touch Screen Repair | Available Now |
| CP650-WEB 1SAP550200R0001 | CP650-WEB 1SAP550200R0001 Resistive Touch Panel Repair | In Stock |
| CP651 1SAP551100R0001 | CP651 1SAP551100R0001 Touch Panel Front Film Repair | In Stock |
| CP651-WEB 1SAP551200R0001 | CP651-WEB 1SAP551200R0001 Front Overlay Glass Repair | Available Now |
| CP660 1SAP560100R0001 | CP660 1SAP560100R0001 Front Overlay Touch Repair | Available Now |
| CP660-WEB 1SAP560200R0001 | CP660-WEB 1SAP560200R0001 Film Panel Glass Repair | In Stock |
| CP661 1SAP561100R0001 | CP661 1SAP561100R0001 Glass Panel Overlay Repair | In Stock |
| CP661-WEB 1SAP561200R0001 | CP661-WEB 1SAP561200R0001 Touchscreen Front Film Repair | Available Now |
| CP665 1SAP565100R0001 | CP665 1SAP565100R0001 13.3'' Touchpanel Overlay Repair | Available Now |
| CP665-WEB 1SAP565200R0001 | CP665-WEB 1SAP565200R0001 Overlay Glass Screen Repair | In Stock |
| CP676 1SAP576100R0001 | CP676 1SAP576100R0001 Touch Panel Protective Film Repair | Available Now |
| CP676-WEB 1SAP576200R0001 | CP676-WEB 1SAP576200R0001 Front Overlay Touch Screen | In Stock |
| Control Panel 600 Series HMI | Description | Inventory status |
Control Panel 600 HMI Manuals PDF Download:
FAQ:
Question: How the unit is grounded to earth?
Answer:
1. Do the earth connection using either the screw or the fasten terminal located near the power supply terminal block. A label helps identify the ground connection.
2. Connect to ground the terminal 3 on the power supply terminal block.
3. The power supply circuit may be floating or grounded. In the latter case, connect to ground the power source common as shown in the figure below with a dashed line.
When using the floating power scheme, note that the panes internally connects the power common to ground with a 1 MΩ resistor in parallel with a 4,7 nF capacitor.
Question: How to install the CP676 1SAP576100R0001 operator terminal correctly?
Answer:
• the borders of the cutout must be flat.
• screw up each fixing screw until the plastic bezel corner get in contact with the panel.
• the cutout for the panel must be of the dimensions indicated in this manual.
Common misspellings:
CP76 1SAP576100R0001
CP676 1SAP5761000001
CP766 1SAP576100R0001
CP676 1SAP57610R00001
CP676 1SAAP576100R0001
- Loading...
- Tel
- *Title
- *Content
Fast Quote
Fast Quote
Worldwide Shipping
12 Months Warranty
Customize Service
- Tel
- *Title
- *Content
