METTLER-TOLEDO GARVE XS3 XS2 Touch Digitizer Glass Film

Order each part separately is available

An METTLER TOLEDO GARVE XS3 XS2 MMI Touch Screen Front Overlay scale optimal location will ensure accurate and reliable operation of the balance. The METTLER TOLEDO GARVE XS3 XS2 HMI Front Film Touch Screen Terminal surface must be able to safely take the weight of the balance when fully loaded. The following local conditions must be observed:

Important
If the balance is not horizontal at the outset, it must be leveled during commissioning.
• Operate the balance only indoors and at an altitude of less than 4000 m above sea level.
• Before switching on the balance, allow all its parts to reach room temperature (+5 to 40 °C). Make sure that the relative humidity is between 10% and 80% and non-condensing conditions are met.
• The Mettler-Toledo GARVE XS3 XS2 Touch Digitizer Protective Film scale power plug must be easily accessible.
• Firm, horizontal location as free from vibrations as possible.
• Avoid direct sunlight.
• No excessive temperature fluctuations.
• No powerful drafts.
• Surroundings as free from dust as possible.