UF5511-2-DV2M-5V PFXZPB2IUFAN1 UF5511-2-DV2M-12V PFXZPB5IUFAN1 Pro-face Touch Panel

Notes on the UF Series UF5511-2-DV2M-5V PFXZPB2IUFAN1 UF5511-2-DV2M-12V PFXZPB5IUFAN1 Touchscreen Panel unit's Liquid Crystal Display (LCD)
• The displayed color will look different when viewed from an angle outside the specified view angle. This is also normal.
• Displaying a single screen image for long periods of time can cause an afterimage to remain. To correct this, turn the UF5511-2-DV2M-5V PFXZPB2IUFAN1 UF5511-2-DV2M-12V PFXZPB5IUFAN1 Touch Screen Monitor unit OFF for 5 or 10 minutes, then turn it ON again. This phenomenon is a common attribute of the LCD units and not a defect. To prevent this effect, you can:
- use the Display OFF feature, if the same image is to be displayed for a long period of time.
- change the screen display periodically to prevent the displaying of a single image for a long period of time.
• The UF UF5511-2-DV2M-5V PFXZPB2IUFAN1 UF5511-2-DV2M-12V PFXZPB5IUFAN1 Touch Digitizer Glass unit's LCD contains a strong irritant. If the panel is damaged and the LCD unit's liquid contacts your skin, be sure to wash it with running water for at least 15 minutes. If any of this liquid should enter your eye, be sure to flush the eye with running water for more than 15 minutes and see a doctor immediately.
• The brightness of the LCD screen will depend on the screen's current display and the LCD unit's contrast adjustment. Any brightness variations that result are normal for UF5511-2-DV2M-5V PFXZPB2IUFAN1 UF5511-2-DV2M-12V PFXZPB5IUFAN1 LCD displays.
• There are minute grid points on the UF5511-2-DV2M-5V PFXZPB2IUFAN1 UF5511-2-DV2M-12V PFXZPB5IUFAN1 LCD surface. These points are not defects.